I finally found some seats to swap into my truck. The white leather doesn't exactly match, but my truck will not be winning any beauty contests anyway.

Paid $150 for the pair without tracks. Not sure the exact year. The guy I bought them from owns a 96, but he got them from someone else.

My old passenger tracks needed to have 2 holes drilled to match up. The extra plate on the tracks has 3 holes on each corner, but the rails themselves only have one on each corner. Guessing they just drilled the hole for the specific application. The driver side bolted right up. I however made the mistake of not undoing the spring before taking out the first bolt. I took the spring off after that and skinned my knuckle. After making sure my tetanus shot was still current, I finished bolting them up and putting them in the truck.

Test drove and I have to say, even if my old drivers seat wasn't leaning, they're a huge improvement.

Now I just need to figure out how to wire them up.


Passenger side

Driver side

Old seats

 

looks good, but you shouldn't have had to drill a new hole in the track. you could have just started the bolt in the non-threaded hole and it would have cut new threads.