Technically, this is out of about a later 90's Explorer, but before I start ripping into it, I was wondering what is all involved in removing the console?

 

Remove the black cupholder assembly up front (I believe it has two screws, remove them and then lift it up to release the clips), then remove the two screws at the bottom of the console. Next, remove the two little plastic covers at the back of the console. Once those are gone, you'll see the four bolts (two per side) holding the arm rest onto the bracket. Remove those and then lift the armrest off and set it aside. Once the armrest is gone, you should be able to see the remaining screw that was hiding under the armrest base. Remove that, and the console body should lift off of the armrest pivot bracket.

 

Thank you!