getting some fx4 buckets on monday :) black and red with the black center console!

question though...will my seats in my 03 fit a 98?? i'm gonna hook my buddy up if they do :) thanks

and pics will come soon!!!

 

question about doing the center console from the fx4...

since i have the bench seats how do you go about attaching the new console to the floor? if anyone has done this let me know!

 

look up a how to for doing the center console. It's not based on bucket seats in a ranger.

 

I took some Seat from a ’98 Ext Cab and put them in an ’03 Std Can EDGE.
Change the Slider/tracks around; they unbolt from the seat pans.

I went from a 60/40 Seat to Buckets w/shorty Console, the front mount was in the floor, back I still haven’t setup.

Just a note… the passenger side of the 60/40 is the same as a any bucket seat minus the Lumbar support and control ****; the seat pan is the same with all of the holes necessary to mount in what you want.

 

thats nicwe to know the front mounts are there for the console :) i should be able to figure something out. it may or may not be slightly rednecked but it will work! haha. the seats i'm not worried about at all.

and it sounds like my old seats should work in an older truck with a little tinkering? my buddy will be happy. his are all worn to hell and his center console is all busted and broken