custom center consoles
 

hey I was just wondering if there is any body out here that has made there own center consoles. like out of mdf, fiber glass are what ever. I am trying to get some ideas to make my own. I want to put a 8 are 10in sub in the front and mount my gps down there to. I have some ideas but I am not a good artist. plz show me what you got all is welcome

Farwar has

Here is the link to the one I built. I have pictures of the frame there. I made mine so I didn't have to cut anything in the truck up and I can go back to stock of I want to without any problems. If you have any questions, I'll try to answer then but that was my first time doing something like that. Get some cardboard and just try different shapes and such, good way to start.

https://www.ranger-forums.com/forum2...ad.php?t=69157

when are you gonna make me one ryan?

I built this for my old truck...

http://www.photodump.org/stored26/IMG_0564A.jpg

kool thanks guys keep them coming if there is any more

I'm in the process of building mine atm, but its on hold til I get my rear end back together. It will be glassed eventually. Still some rough edges then need some polishing :wink:


Attachment 160647

Attachment 160648

Attachment 160649

You guys rock. Those all look good.

Nobody has a sub incorp. with theirs?

I hate subs in the console, especially if you have an ext cab.

think you can get me the dimensions for this i like it alot and im about to do the 60/40 to 40/40 and i need a console what kind of material did you use

looks good

Attachment 158192Attachment 158193
Attachment 158194
Attachment 158195
Attachment 158196
Attachment 158197

Built mine out of mdf. Made it so I could use the stock armrest as a cover. Strong as hell. Was gonna fiberglass it, but that didnt work out so I rhino lined it reall good. Like it so far. Love the storage space. Space for my ipod is great. Biggest flaw so far is the cupholders, still have to figure out a better solution for that.

Fail on the pics lol

Here's my design for mine

Attachment 158187


and here's an in-progress pic

Attachment 158188


for some reason I can't find any pics of the finished console, except this one

Attachment 158189

If you want to see more of it,I'll go take some more pics.

I have a matching overhead console too.

thats pretty sweet i like that

I would love to see more pics, and the OHC too

ok, I'll charge up the camera batteries and get some pics

i have a sub in mine.

https://www.ranger-forums.com/forum2...ad.php?t=83950

thats the link. mine is towards the bottom

OK I got some pics

Attachment 158167

Attachment 158168

Attachment 158169

Attachment 158170

Attachment 158171

It's not anywhere close to the design I came up with -
I didn't have as much room for cup holders as I thought and I didn't
make the space for the t/c shifter.

It's still a work in progress

It looks alot similar in design to Thefigus's, but i have a shifter where the cup holders are and the front part on mine flares out

the new 1s look sick and is helping me for some ideers lol

yeaa i wanna cut my seats to a 40/40 and then build /find a console... im thinking fab my own since every exploder ive looked at in 2 junk yards are stripped of their consoles or people were so rabbid to claim parts they massacred other parts of them

so i have some extra wood from the hurricain lol im going to see if i have enough to start building my own since i went to 4 JY today and no luck on the exploder consoles or seat =(

to make mine, it took some scrap wood, and a good 2-3 hours. everything was made out of scrap. even the bullet proof glass.

what did you use to rap this item