Finished Paiting Interior (10 Pics)
Finished Paiting Interior (10 Pics)
So I finally finished painting my interior white. All I did was take everything off sand it with 400 grit sand paper and put three coats of white paint on it.
Some pics are a little blurry









Some pics are a little blurry









yours looks great because its color matched with the ext. but i think deep wedge wood blue would look funny on the interior of mine so i need to find a nother color maybe a silver like the newer ones
the trim peace that goes around my radio and heat controls is peeling its almost like they just put a big silver sticker over it instead of pain it. I have been thinking about taking a heat gun to it and getting it all off then painting it. was it pretty easy to do? any word of wisdom befor I start it. I think thats going to be this weekends project.
yeah i plan on doing that panel but i ran out of paint today...
Boomer all i can tell you is that if you go the sanding route make sure you sand it really good. I took two hours to sand the radio trim... trust me it will be work it when your done
Boomer all i can tell you is that if you go the sanding route make sure you sand it really good. I took two hours to sand the radio trim... trust me it will be work it when your done
Ya man that looks great!!!!! And as far as matching the deep wedgewood...I tried it on the door insert and I thought it looked totally out of place. The only way I think it would work is if you did at least what he did with the white if not as much as the red.
I agree, should of stopped after the radio bezel and the door bezels. Looks tacky...
Thread
Thread Starter
Forum
Replies
Last Post





