Oh no whats wrong can you spot it?
3 Attachment(s)
well something is wrong in this picture can you tell what it is?
Attachment 160722 and as soon as i got home i put my cd player in! thanks for the deal Jewler. before Attachment 160723 after Attachment 160724 |
your seatbelt's not on...shame on you
|
haha sorry but i was sitting in the drive way.
|
NO OIL PRESSURE!!!! turn off your engine to avoid terminal failure!!!! hahaha
|
PRND12 or what?
|
Is your oil gauge broken?
|
No oil pressure is FTMFL!!!!
|
took me a double glance to spot the oil pressure.
is that just the gauge going wacko, or do you really not have any oil pressure? |
noticed the oil guage soon as i looked at it
|
I'd say replace your oil sending unit sensor, but your "check gauges" light isn't on. I think your gauge itself could be f'ed.
|
I think it's time for an update.
|
and I think its time to CLEAN YOUR TRUCK!
|
change you oil pressure sending switch. I had same problem change the switch all is fine now.
|
just get you a set of mecanical guages, thats what i did
|
God your truck is filthy.
|
Radio looks the same before and after
|
Originally Posted by TrucknGolf
(Post 1306090)
PRND12 or what?
Originally Posted by Hitch
(Post 1306266)
and I think its time to CLEAN YOUR TRUCK!
Originally Posted by STL
(Post 1306295)
Radio looks the same before and after
As for the oil gauge. when i took my dash apart to replace the bulbs i blew it out with the air hose to clean it a little and the needles were spining around i thought i had them all back in the right place but a couple weeks later relized i didnt have any oil pressure. if you look closely you can see that the needle is below the pin so it spun around backwards. had to take it apart again and put it back in the right spot. good job |
My guage is at the same spot!! how the hell do you get it back on top of the little needle?
|
2 Attachment(s)
I took the dash apart untill it looked like this and shoved a peice of bailing wire into the hole in the bottom right corner and used it to push it around.
Attachment 159078 Attachment 159079 Here is the link to take the dash apart. You dont have to take the cluster out unless you are still having trouble. https://www.ranger-forums.com/forum2...ad.php?t=65263 |
i can't believe i missed this thread. about a year ago when my truck would idle @ red lights, the oil gauge would go nuts and smack back and forth against the pin, until finally it went under it. where it's been ever since.
no check engine, no codes, no problem... |
Cool, thanks man. I'm not crazy about taking the dash apart again, but it better than not having a working guage.
|
Originally Posted by t_schloesser
(Post 1315693)
i can't believe i missed this thread. about a year ago when my truck would idle @ red lights, the oil gauge would go nuts and smack back and forth against the pin, until finally it went under it. where it's been ever since.
no check engine, no codes, no problem... |
Originally Posted by htjunkie
(Post 1318072)
Your "check gages" light isn't on?
|
All times are GMT -6. The time now is 05:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands