Interior Semi-Tech General discussion of interior for the Ford Ranger.

Question, if you dont have jump seats....

Thread Tools
 
Search this Thread
 
Old Sep 28, 2009
  #1  
DrMacZed's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 92
Likes: 0
From: Corvallis, Oregon
Question, if you dont have jump seats....

What does Ford put there instead of the seats and related hardware? I have been contemplating removing the drivers side jump seat from my truck, (I am still wondering what possessed me to order the damn things in the first place) but I don't want a gaping hole where the seat used to be and would like to replace the seat with whatever factory part goes in there when the seats are not fitted. Any one out there have a non 4 door supercab without the jumpseats? If you do could you post a picture and or the part number of what ever Ford puts in there instead?

Thanks
 
Reply
Old Sep 28, 2009
  #2  
whippersnapper02's Avatar
RF Veteran
iTrader: (1)
Joined: Sep 2006
Posts: 7,415
Likes: 4
From: Earth, Milky Way Galaxy
They put nothing really. Instead of seats you have storage. Then just carpet or vinyl on the floor.
 
Reply
Old Sep 28, 2009
  #3  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
A plastic door with a storage cubby....

best pic I got....04/05 2dr Edge...
 
Reply
Old Sep 28, 2009
  #4  
DrMacZed's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 92
Likes: 0
From: Corvallis, Oregon
Originally Posted by Fx4wannabe01
A plastic door with a storage cubby....

best pic I got....04/05 2dr Edge...
Thanks Shane. I'll have to look at the pic later when I get home stoopid filter here at work is blocking the picture. You don't happen to know the part number for that part? Or what ford calls it?
 
Reply
Old Sep 28, 2009
  #5  
zabeard's Avatar
who?
iTrader: (8)
Joined: Nov 2004
Posts: 26,044
Likes: 10
From: IN
you cant run that cubby on a 4door.
 
Reply
Old Sep 28, 2009
  #6  
Fx4wannabe01's Avatar
RF Veteran
iTrader: (23)
Joined: May 2005
Posts: 21,721
Likes: 17
From: Boring, Oregon
OP has a two door.

SorryScott, i dont know the part # or what its technically called. If I was you, Id take a drive to one of the B&R yards down there(corvallis or eugene)...I'm sure theyve got 'em.
 
Reply
Old Sep 28, 2009
  #7  
nate_g_2003's Avatar
Member
Joined: Jun 2009
Posts: 976
Likes: 1
From: Deer Park, TX
I'll look in the morning, as I have that setup in my truck. But my cubby doors have bins on them. I'll try to get some cell pics as well.
 
Reply
Old Sep 29, 2009
  #8  
Smakes's Avatar
Member
iTrader: (5)
Joined: Nov 2008
Posts: 235
Likes: 0
From: nowhere
dam i want some of those! i hate my jump seats
 
Reply
Old Sep 29, 2009
  #9  
Semaj82's Avatar
Member
iTrader: (1)
Joined: Apr 2009
Posts: 243
Likes: 0
From: Northeast Iowa
I want a back seat... lol.

Single Cab, ftl.
 

Last edited by Semaj82; Sep 29, 2009 at 12:27 AM.
Reply
Old Sep 29, 2009
  #10  
2001fordranger's Avatar
Joined: Jun 2009
Posts: 596
Likes: 1
From: USA
yea its strange they dont have many at junkyards. Most folks dont have them. but you can get them for $120 at the dealer for both. here in cali is what i got mine for last month.
 
Reply
Old Sep 29, 2009
  #11  
08XLT4x4's Avatar
Member
iTrader: (7)
Joined: Mar 2008
Posts: 3,257
Likes: 2
From: bomba shack
I hate my 4 doors... they rattle like a mo fo. sucky ford
 
Reply
Old Sep 29, 2009
  #12  
Smakes's Avatar
Member
iTrader: (5)
Joined: Nov 2008
Posts: 235
Likes: 0
From: nowhere
Originally Posted by 08XLT4x4
I hate my 4 doors... they rattle like a mo fo. sucky ford
ill trade you truck for truck right meow. your always talking about how you want a lowered truck lol
 
Reply
Old Sep 29, 2009
  #13  
08XLT4x4's Avatar
Member
iTrader: (7)
Joined: Mar 2008
Posts: 3,257
Likes: 2
From: bomba shack
we'll see after you get that headliner done
 
Reply
Old Sep 29, 2009
  #14  
nate_g_2003's Avatar
Member
Joined: Jun 2009
Posts: 976
Likes: 1
From: Deer Park, TX
Question, if you dont have jump seats....PICS/PART NUMBERS

Alright, here is some pics of the cubby bins. I tried to get pics of the part number on the door, but not sure how they will turn out.

Closed
Name:  1254234460.jpg
Views: 506
Size:  108.7 KB
Open
Name:  1254234494.jpg
Views: 522
Size:  217.3 KB
Driver Side Part Number
Name:  1254234471.jpg
Views: 453
Size:  55.6 KB
Passenger Open
Name:  1254234409.jpg
Views: 449
Size:  215.0 KB
Passenger Part number
Name:  1254234519.jpg
Views: 534
Size:  57.2 KB
 

Last edited by nate_g_2003; Sep 29, 2009 at 08:51 AM.
Reply
Old Sep 29, 2009
  #15  
Smakes's Avatar
Member
iTrader: (5)
Joined: Nov 2008
Posts: 235
Likes: 0
From: nowhere
stash of red cups FTW
 
Reply
Old Sep 29, 2009
  #16  
Downey's Avatar
RF Veteran
iTrader: (1)
Joined: Oct 2007
Posts: 8,470
Likes: 6
From: Muncy, PA
Originally Posted by nate_g_2003
Alright, here is some pics of the cubby bins. I tried to get pics of the part number on the door, but not sure how they will turn out.

Closed

Open

Driver Side Part Number

Passenger Open

Passenger Part number

thats exactly how mine look to with the pocket on the little door its self. they are nice but dont hold much


even funnier i have a thing of red cups on the passenger side too lol
 
Reply
Old Sep 29, 2009
  #17  
dixie_boysles's Avatar
Member
iTrader: (1)
Joined: Jul 2006
Posts: 3,779
Likes: 6
From: NC
Originally Posted by nate_g_2003
Alright, here is some pics of the cubby bins. I tried to get pics of the part number on the door, but not sure how they will turn out.

Closed

Open

Driver Side Part Number

Passenger Open

Passenger Part number
ahh thats sucks, i dont have that little pocket on the backside of my cubby doors! i want one!
 
Reply
Old Sep 29, 2009
  #18  
nate_g_2003's Avatar
Member
Joined: Jun 2009
Posts: 976
Likes: 1
From: Deer Park, TX
I don't know if the black part has a part number on it or not, I can look when I go back to work.

And you gotta have red Solo cups...never know when an impromptu game of beer pong may pop up. I used to have ping pong ***** too, but I think I lost them...
 
Reply
Old Sep 29, 2009
  #19  
DrMacZed's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 92
Likes: 0
From: Corvallis, Oregon
Awesome thanks nate for the pics. Hell if they are only $120.00 for the set I will just buy 'em at the stealership. They are a might small inside though but nothing a little hack and slash cant fix. there is tons of room in that spot for stashing crap even with jump seats; as it stands now i have a set of chains and jumper cables in the driver's side and the jack and my really big CGU-B ratchet strap in the other. and the seats still close with that cover instead I could put some recovery gear in there too.
 
Reply
Old Sep 30, 2009
  #20  
nate_g_2003's Avatar
Member
Joined: Jun 2009
Posts: 976
Likes: 1
From: Deer Park, TX
yeah, below the black tray, I have jumper cables on the driver side, and the jack on the passenger side. The pockets below the tray are actually quite roomy.
 
Reply
Old Sep 30, 2009
  #21  
Downey's Avatar
RF Veteran
iTrader: (1)
Joined: Oct 2007
Posts: 8,470
Likes: 6
From: Muncy, PA
^^^ on the 4wd trucks the module and **** are there so not much room
 
Reply
Old Sep 30, 2009
  #22  
t3ob's Avatar
Member
Joined: Apr 2008
Posts: 1,762
Likes: 1
From: Olive Branch, MS
yep, its little cubby holes I got em too...
 
Reply
Old Sep 30, 2009
  #23  
DrMacZed's Avatar
Thread Starter
|
Member
Joined: Sep 2007
Posts: 92
Likes: 0
From: Corvallis, Oregon
Originally Posted by nate_g_2003
yeah, below the black tray, I have jumper cables on the driver side, and the jack on the passenger side. The pockets below the tray are actually quite roomy.
So the "pockets" are removable then?
 
Reply
Old Sep 30, 2009
  #24  
nate_g_2003's Avatar
Member
Joined: Jun 2009
Posts: 976
Likes: 1
From: Deer Park, TX
no, only the black tray is removable, there isn't anything below, just space. It has sound deadening/insulation down there.
 
Reply
Old Nov 28, 2009
  #25  
93rangerXLT4x4's Avatar
Joined: Aug 2009
Posts: 959
Likes: 2
From: Salmon Arm BC
in my 93 i am considering pulling out my jump seats and cutting a piece of plywood to cover the hole then cutting a round hole in the middle of the plywood so i can stuff my aftermarket 6.5" speakers there. was gonna put them in the doors to replace the stock ones but if i can put them where the jump seats are that would be sweet.. then i'd have 4 speakers and my 10" that i forgot i had.
 
Reply



All times are GMT -6. The time now is 12:24 PM.