Does anyone have any pictures of the BACK side of their radio bezel (any years that are the same as my 96) and the corresponding open areas behind the bezel area where the factory fog light switch, etc. go??

I have the 4x4 switch, lighter socket & factory fog switch, but it's been a while since I had the entire bezel off & I can't remember if there is any available open area directly above or below the factory fog switch on the right side of the bezel (or in the dash behind it)

Does the factory fog switch/bracket take up all of whatever open area above & below the switch?

I've seen explorers with the rear defroster or rear wiper buttons above the fog switch, but I didn't know if Ford used different brackets to hold each configuration in place.

I'm thinking about moving my new fog lights & rear lights switches up by the factory fog switch, but I didn't want to waste the time removing the radio & bezel (not to mention all the other stuff that I have connected) if there wouldn't be enough room to add a couple switches.

The flush mount LED switches I have need a 3/4" diameter hole and 1"+ depth including the connectors.

 

it's a completely open area behind the blank spots.

removing the radio bezel only takes a whopping 30 seconds.