Interior Semi-Tech General discussion of interior for the Ford Ranger.

Rattle... Please Help!

Old Jun 18, 2005
  #1  
Tight Ranger's Avatar
Thread Starter
|
Member
Joined: Apr 2005
Posts: 73
Likes: 0
From: Sioux Falls, SD
Rattle... Please Help!

I have a horrible rattle comming from my driver's side rear door.
I removed the door panel and have secured everything that I
can in the door with either tape, or by wedging socks between
cables, and still there is a rattle. I cannot recreate the rattle
without driving it, which makes me think it may be a latch issue.

Has anyone else had this problem, and what did it take to fix it.
Any ideas would be greatly appreciated.

Thanks
 
Reply
Old Jun 18, 2005
  #2  
theeicebox's Avatar
Member
Joined: May 2005
Posts: 18
Likes: 0
From: eunice, louisiana
rattle my bones

on my truck i had a rattle when my truck would thump, the problem was they have some type of sound barrer tape stuck to the inside of the door skin and it had stared to come ungluded. it was black and about 1/8 thick and hard. so i removed the porition that had unstuck and the rattle went away. if any help.
 
Reply
Old Jun 18, 2005
  #3  
Rev's Avatar
Rev
Member
Joined: May 2005
Posts: 1,179
Likes: 8
From: San Diego, CA
Try leaving the door panels off and having someone drive while you look around. Thats about the best way to find them critters
 
Reply
Old Jun 19, 2005
  #4  
Tight Ranger's Avatar
Thread Starter
|
Member
Joined: Apr 2005
Posts: 73
Likes: 0
From: Sioux Falls, SD
Originally Posted by theeicebox
on my truck i had a rattle when my truck would thump, the problem was they have some type of sound barrer tape stuck to the inside of the door skin and it had stared to come ungluded. it was black and about 1/8 thick and hard. so i removed the porition that had unstuck and the rattle went away. if any help.
I removed a 4" section that was loose and flopping around, but no luck for me.

I think i will have to squeeze myself into the back and listen for the exact spot.

Edit: I put a rag on the bottom latch, and it seemed to make the rattle stop.
Is the black bottom latch adjustable? If so, what size Torx Bit does it use?


Thanks
 

Last edited by Tight Ranger; Jun 20, 2005 at 05:42 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
annguyen1981
General Ford Ranger Discussion
13
Dec 5, 2013 02:35 PM
diocide
2.9L & 3.0L V6 Tech
5
Mar 31, 2010 04:30 PM
gotmud?
Suspension Tech
1
Apr 15, 2009 03:33 PM
EtniesRIT
4.0L OHV & SOHC V6 Tech
0
Jun 1, 2004 08:04 PM


Thread Tools
Search this Thread

All times are GMT -6. The time now is 03:04 PM.