So i took the worst friend possible ( he can talk me into anything) to Home Depot. Instead of buying something cheap that would do the trick i walked out with a Dewalt sawzall with a nice hole in my wallet.......

I just got my seat out, and was reading jasons "HOW-TO" and it's a little vague as to where exactly to cut. I mean i know there area but if any of yall could take this pic \/ \/ and PS or mspaint or whatever and draw a nice line of where exactly i should cut( like how close or far from the seat and other lil dodads down there) i would greatly appreciate it

 

also does anyone know if i should be using the 14 or 18 TPI?? or does it matter with this

all i know is 14 is for thick metal and 18 is medium

 

nevermind, got sick of waiting lol and just cut through it, turned out great. now i just need seat covers....

An Admin can DELETE this thread if they want , its useless now

 

FREE POST...

But can you show pics when your done...

 

Yeah how bout you draw the line and tell everyone else considering this where to cut exactly.

 

I'm at work right now, but I'll show you where I cut when i get home, It'll be around 11 p.m. eastern. and for those doing this your are gonna want to unbolt the armrest storage part before you cut so you can salvage that piece and make it easier on your saw. Also if there is anyone in the tampa area who wants to do this but doesnt have the tools, I do and would be glad to help.

 

how did it turn out?

 

Came out pretty well i think, i just miss my armrest for now. in the pick below the green line is where i cut, and the red line is where i think i should have cut. I havent cut any of the fabric yet just tucked it in.I'll edit this post a lil later including more pics

 

hey big will, sounds like you are interested in this mod and the expo center console, it is possible even with the 5speed, you just have to cut a lil bit but its been done and looks good