how hard would it be to make seats from a 2004 extended cab mazda fit into a 2006 std cab ranger?

 

just swap the seat belt tensioner's and you should be good if they need to be unless you got those new presser style than swap them too

not hard just time involved

 

isn't there something with the seat tracks that are different from an extended cab,a nd reg cab?

 

No, you can't go from an extended cab Ranger to a standard cab Ranger. The problem is they started making the regular cab Ranger a one piece driveshaft and the back of the cab humps up. This hump makes the Ranger have very different seat brackets. You may be able to swap the tracks and everything but I highly doubt it. I tried this with a set of Explorer Bucket seats and I couldn't get it to work without some serious welding.

 

I agree with Hillyard, usually the newer ranger tracks/seats are one piece and would require extensive cutting/welding to get them to work.

 

did not read the ext cab deal . bad silver should read it all lol

but yes they are different though not sure of the swapping the seat pans and tracks with in those years but i know from the 01/03 to 04 are not even close