Can i swap seats from 1995 ranger ext cab (with buckets and center console)to 2001 ranger ext cab with 60/40, and vice versa. Looks like i'll have a wiring problem and possibly effect the seat belt/airbag alarm in the 2001?
I think i can run a hot and ground to the elect that will be installed in the 2001. Also will have to change out the seat belt harness on both. Thanks for any help.

 

The floor pan between the two years are different.
You will have to change the rail bases to get the 60/40 to fit, the spread between the rail mounting holes on the 01 seats should be the same, but measure before you get to far.