Interior Semi-Tech General discussion of interior for the Ford Ranger.

Seat Covers and Floor Mats

Thread Tools
 
Search this Thread
 
  #1  
Old 08-15-2009
then bob says's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: CA
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Seat Covers and Floor Mats

I tried searching for some old threads, but was unsuccessful. I apologize in advance if this has already been discussed.

I have a new '09 Ford Ranger Regular Cab with a vinyl split bench seat and arm rest (no opening console), and vinyl flooring (no carpet).

I would like to get some nice fitting seat covers that are relatively inexpensive (under $80) and some all weather floor mats. Most of the floor mats I've seen are designed for carpet and have sharp nibs on the bottom. I am afraid to put them on the vinyl because they might poke through the surface and into the padding.

Any suggestions would be greatly appreciated. I have searched for quite a while. I know the factory makes some OEM rubber mats for about $60, but I think they have those nibs on them as well.

Thanks,

Rob
 
  #2  
Old 08-16-2009
Join Date: Dec 2008
Location: Plattsburgh, New York
Posts: 3,390
Likes: 0
Received 2 Likes on 2 Posts
buckgnarly might still have his seat covers and mats for sale. PM him
 
  #3  
Old 08-16-2009
then bob says's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: CA
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Can I put any floor mat over the vinyl flooring, you think? Or do you think the sharp nibs will poke through?
 
  #4  
Old 08-16-2009
DisturbedESV's Avatar
Member
Join Date: Apr 2008
Location: Seattle, WA
Posts: 3,115
Likes: 0
Received 1 Like on 1 Post
I would recommend splurging a little... I got the ones for my '99 on ebay and it was like $110 for the set of covers for a 60/40 w/ opening arm rest. The nice thing about those were they were snug and looked stock. A PITA to get on but I never had any problems with 'em and never had to re-adjust anything. As for rubber mats I was looking at those on ebay yesterday too... I think it was like $50-$60 for a set?? Don't remember...
 
  #5  
Old 08-16-2009
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
  #6  
Old 08-16-2009
Smakes's Avatar
Member
iTrader: (5)
Join Date: Nov 2008
Location: nowhere
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
^^ he wants cheap seat covers not 350 worth lol
although they are
 
  #7  
Old 08-16-2009
paseries's Avatar
Member
iTrader: (3)
Join Date: Jun 2009
Location: Cypress,TX
Posts: 169
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by then bob says
Can I put any floor mat over the vinyl flooring, you think? Or do you think the sharp nibs will poke through?
I have the same floor, the nibs are not sharp enough to poke through.
 
  #8  
Old 08-16-2009
08XLT4x4's Avatar
Member
iTrader: (7)
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by Smakes
^^ he wants cheap seat covers not 350 worth lol
buy it nice, or buy it twice. $350 is well worth it... besides you can get wet okoles for much less than $350 if you get plain ones
 
  #9  
Old 08-16-2009
then bob says's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: CA
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Thanks for the replies!

DisturbedESV:
Do you remember which seat covers or manufacturer you purchased from on eBay?
 
  #10  
Old 08-16-2009
Trigger01's Avatar
RF Veteran
iTrader: (2)
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Likes: 0
Received 1 Like on 1 Post
I have the factory Ford Floor mats in my truck and they could never poke through the floor. I would recommend getting them. I didn't have to pay for them though. ford bought them for me when they set my truck on fire... no I'm not kidding.
 
  #11  
Old 08-16-2009
Smakes's Avatar
Member
iTrader: (5)
Join Date: Nov 2008
Location: nowhere
Posts: 235
Likes: 0
Received 0 Likes on 0 Posts
threadjack


mike pix or gtfo
 
  #12  
Old 08-16-2009
TXRanger09's Avatar
Member
iTrader: (1)
Join Date: Jul 2009
Location: El Paso, Tx
Posts: 1,206
Likes: 0
Received 0 Likes on 0 Posts
set it on fire? wtf?
 
  #13  
Old 08-16-2009
strakill's Avatar
Member
iTrader: (1)
Join Date: Jan 2009
Location: santa maria, Ca
Posts: 430
Likes: 0
Received 0 Likes on 0 Posts
How did they set it on fire and then give you floor mats.
 
  #14  
Old 08-16-2009
DisturbedESV's Avatar
Member
Join Date: Apr 2008
Location: Seattle, WA
Posts: 3,115
Likes: 0
Received 1 Like on 1 Post
I'm trying to find the purchase of the covers... I didn't see 'em when I searched ebay but its been a few years since I've had the truck so about 4 years since I bought the covers... :-\
 
  #15  
Old 08-16-2009
Trigger01's Avatar
RF Veteran
iTrader: (2)
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Smakes
threadjack


mike pix or gtfo
Originally Posted by Spc_Austin
set it on fire? wtf?
Originally Posted by strakill
How did they set it on fire and then give you floor mats.
No pics. sorry. I didn't know about it until after it happened. Around 2005 I took my truck to the dealership because I noticed a little rust on the left and right inner fenders. They told me it would take a week and I didn't have the truck for around 27 days. We went through hell with them. I came in one day to check on it and they had parts of another car in the bed of my truck like it was there for they're storage purposes. I blew up at them at that point too. Any way, they had to completely replace one of the inner fenders so they cut it out and welded in a new one. the dummies didn't lay down a welding blanket in the cab so they caught the rubber mat on fire and melted the driver side floor mat.

I noticed the floor mat when i went to pick up the truck and they said they'd replace it. I let them, thus how I got my OEM floormats.

Anyway, about a week later when I was on my way to work a guy in a Ranger motioned at me to roll my window down, so I did. He asked if my truck was at the dealership and if it was the one that caught fire. I said it was there and one of my floor mats was melted, but I didn't know anything about it catching fire. He said that they burnt the flooring and had to replace it, yada yada yada.

Now you have it, the story of my truck catching fire. Oh, I never took my truck back there again and that service manager got fired soon after, I think my dad and I complaining about him had a little to do with it.
 
  #16  
Old 08-16-2009
Join Date: Dec 2008
Location: Plattsburgh, New York
Posts: 3,390
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by Trigger01
No pics. sorry. I didn't know about it until after it happened. Around 2005 I took my truck to the dealership because I noticed a little rust on the left and right inner fenders. They told me it would take a week and I didn't have the truck for around 27 days. We went through hell with them. I came in one day to check on it and they had parts of another car in the bed of my truck like it was there for they're storage purposes. I blew up at them at that point too. Any way, they had to completely replace one of the inner fenders so they cut it out and welded in a new one. the dummies didn't lay down a welding blanket in the cab so they caught the rubber mat on fire and melted the driver side floor mat.

I noticed the floor mat when i went to pick up the truck and they said they'd replace it. I let them, thus how I got my OEM floormats.

Anyway, about a week later when I was on my way to work a guy in a Ranger motioned at me to roll my window down, so I did. He asked if my truck was at the dealership and if it was the one that caught fire. I said it was there and one of my floor mats was melted, but I didn't know anything about it catching fire. He said that they burnt the flooring and had to replace it, yada yada yada.

Now you have it, the story of my truck catching fire. Oh, I never took my truck back there again and that service manager got fired soon after, I think my dad and I complaining about him had a little to do with it.
Wow that sucks
 
  #17  
Old 08-31-2009
DisturbedESV's Avatar
Member
Join Date: Apr 2008
Location: Seattle, WA
Posts: 3,115
Likes: 0
Received 1 Like on 1 Post
Heard back from the guy who has my old truck and he said the brand is Fia... here's a link...

Looks like the cheapest that aren't universal are $170 but I didn't look on any other sites...
 
  #18  
Old 09-01-2009
BCobe's Avatar
Member
Join Date: Jul 2008
Location: Fairfeild,California
Posts: 1,055
Likes: 0
Received 2 Likes on 2 Posts
01 ranger 4x4(the black one) got some real nice leather ones... Idk where he got them but the look almosty like leather seats...
 
  #19  
Old 09-01-2009
malydeen's Avatar
Member
iTrader: (12)
Join Date: Jul 2007
Location: Minneapolis, MN
Posts: 632
Likes: 0
Received 4 Likes on 4 Posts
I got my floor mats from Costco for like $7 on coupon. I think they still have them for around $15. They dont have the "spikes" on the back. They have 3 or 4 rubber pads on the back that work pretty well at holding them in place.

Heres a pic for ya.
Name:  DSC_0098.jpg
Views: 61
Size:  83.9 KB
 
  #20  
Old 09-10-2009
then bob says's Avatar
Member
Thread Starter
Join Date: Aug 2009
Location: CA
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
  #21  
Old 09-10-2009
DisturbedESV's Avatar
Member
Join Date: Apr 2008
Location: Seattle, WA
Posts: 3,115
Likes: 0
Received 1 Like on 1 Post
Ewwww..... :-/
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jp7
OLD - Interior, Exterior, Electrical, & Misc.
6
09-19-2014 08:21 PM
mikerider
OLD - Interior, Exterior, Electrical, & Misc.
0
10-13-2011 07:34 PM
V8 Level II
Interior Semi-Tech
18
04-26-2011 11:38 PM
marcos
Interior Semi-Tech
3
10-10-2005 01:32 PM
RangerJustin
New Ideas
10
08-18-2005 12:10 PM



Quick Reply: Seat Covers and Floor Mats



All times are GMT -6. The time now is 07:07 PM.