Rausch Creek Meet
#1
Join Date: Jan 2008
Location: Trexlertown,Pennslyvania
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Rausch Creek Meet
So i figured i'd start a thread here and see when everyone would want to have a meet at Rausch Creek, since some of us weren't able to make the last meet.
I was thinking towards the end of May possibly early June. Figured school would be done and gives enough time to request off of work, clear schedules etc.
For you non members its 35 plus 10 bucks for a 1 year member ship.
For you members, obviously its 35 bucks.
I was just on up there with Adam(turdfx4) last weekend, i made most of the green trails in 2wd. There are some areas that you would need 4wd but i would def like to see some 2wd guys come out and give it a try.
And remember to bring food/water as its prolly going to be hot, and theres not a whole lot of shade either.
UPDATE- MEET Scheduled for June 27th 10am(for now)
With that being said, Who wants to go!?
I was thinking towards the end of May possibly early June. Figured school would be done and gives enough time to request off of work, clear schedules etc.
For you non members its 35 plus 10 bucks for a 1 year member ship.
For you members, obviously its 35 bucks.
I was just on up there with Adam(turdfx4) last weekend, i made most of the green trails in 2wd. There are some areas that you would need 4wd but i would def like to see some 2wd guys come out and give it a try.
And remember to bring food/water as its prolly going to be hot, and theres not a whole lot of shade either.
UPDATE- MEET Scheduled for June 27th 10am(for now)
With that being said, Who wants to go!?
Last edited by chevyslayer925; 06-07-2009 at 08:46 PM.
#16
#21
thanks for the wishes guys. and no I dont think I want to chance making another trip that close to the date Im leaving. Ive been having terrible luck as of late. but I'll tell ya's what , I will make it a point to stop in after work though. I get off at 3:00. chances are you guys would still be there right?
and yes we are moving in together. Im going to be living 8 miles away from Route 66. her step mom is hooking me up with a job running equipment/heavy equipment. start off with skid steers and backhoes and work my way up. her brother was making $11.00/hour with no experience. I have experience running skidsteer/forklift/mini-excavators so I should be set. the only thing is Im gonna have to travel a little bit. and which is making me think. and let me put my flame suit on here, Im looking into getting maybe a newer 4cyl. 4x4 toyota. if ford made a 4cyl. 4x4 ranger, Id be set. but they dont make them in the newer styles
and I forgot to mention. in the week since I got back from oklahoma. I had a u-joint go out, and now possibly a wheel bearing or hub, and for some un-godly reason, the flange that comes out of the back of my transfercase that connects to the u-joint was actually bent. how I did it, I have no idea? but we managed to get it bent back. it was off by about 1/16" just enough to not let the retaining clip go in. and I also got de-moted at work so Im back in the **** job I had for 3 years. 3 PEOPLE TOOK MY PLACE! I **** you not 3 people are doing the Job I used to do by myself. F***ing me seems to be the popular thing to do nowadays
and yes we are moving in together. Im going to be living 8 miles away from Route 66. her step mom is hooking me up with a job running equipment/heavy equipment. start off with skid steers and backhoes and work my way up. her brother was making $11.00/hour with no experience. I have experience running skidsteer/forklift/mini-excavators so I should be set. the only thing is Im gonna have to travel a little bit. and which is making me think. and let me put my flame suit on here, Im looking into getting maybe a newer 4cyl. 4x4 toyota. if ford made a 4cyl. 4x4 ranger, Id be set. but they dont make them in the newer styles
and I forgot to mention. in the week since I got back from oklahoma. I had a u-joint go out, and now possibly a wheel bearing or hub, and for some un-godly reason, the flange that comes out of the back of my transfercase that connects to the u-joint was actually bent. how I did it, I have no idea? but we managed to get it bent back. it was off by about 1/16" just enough to not let the retaining clip go in. and I also got de-moted at work so Im back in the **** job I had for 3 years. 3 PEOPLE TOOK MY PLACE! I **** you not 3 people are doing the Job I used to do by myself. F***ing me seems to be the popular thing to do nowadays
Last edited by TurdFX4; 06-07-2009 at 08:08 PM.
#22
Join Date: Jan 2008
Location: Trexlertown,Pennslyvania
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
#25