1999 dragster
#1
1999 dragster
Hey I am Torkit from Texas. This is my second Ranger its a single cab 99. My first one was a custom 93 white single cab Splash. I put over 250,000 on it. Great truck, if you own a Splash we can be friends. I prefer stepside minitrucks. My daily is a 01 stepside Taco. Here are some details about the 99 buildup.
1999 Ford Ranger 2.3l four cylinder
20 inch forged chrome wheels
Complete air bag suspension with 5 gallon tank, 175 PSI
eight 3/8'' electric valves for quick pancake action, and front back and side to side
4 link with monster notch for the axle.
Motor raise 2 inch, frame Zed to lay frame on 20''.
Custom transmission crossmember
Crystal cut corners, fogs, and headlights w/ LEDs.
15 gallon aluminum fuel cell and battery in the bed.
Panasonic CD player with Kicker L7 solobaric 10''
Limo tint for the police to look at.
Fiberglass bed cover, not in the pictures
Wolfe Race Craft - Home Page did all the suspension work.
Future plans:
Paint and body work with mild graphics.
Roll pan shave tailgate.
Updated taillights
Billet interior accessories
Low back buckets seats
Show it at custom truck shows.
1999 Ford Ranger 2.3l four cylinder
20 inch forged chrome wheels
Complete air bag suspension with 5 gallon tank, 175 PSI
eight 3/8'' electric valves for quick pancake action, and front back and side to side
4 link with monster notch for the axle.
Motor raise 2 inch, frame Zed to lay frame on 20''.
Custom transmission crossmember
Crystal cut corners, fogs, and headlights w/ LEDs.
15 gallon aluminum fuel cell and battery in the bed.
Panasonic CD player with Kicker L7 solobaric 10''
Limo tint for the police to look at.
Fiberglass bed cover, not in the pictures
Wolfe Race Craft - Home Page did all the suspension work.
Future plans:
Paint and body work with mild graphics.
Roll pan shave tailgate.
Updated taillights
Billet interior accessories
Low back buckets seats
Show it at custom truck shows.
#13
#21
Thanks guys, I took some more requested photos. The bed is unfinished I need to trim the tubs for the axle, sand and paint all the metal work. This is just the start I have plans, the truck is built for 22'' wheels.
20'' hit blower. No AC in TX is a problem. This is a grocery getter.
Unfinished Bed
Side view, bag mount.
Lifted all the way
Drive height, camber is correct
Layed out
Railin, you can see the valves on the frame. There is four on each side.
This is why the bumper is bent.
20'' hit blower. No AC in TX is a problem. This is a grocery getter.
Unfinished Bed
Side view, bag mount.
Lifted all the way
Drive height, camber is correct
Layed out
Railin, you can see the valves on the frame. There is four on each side.
This is why the bumper is bent.
Thread
Thread Starter
Forum
Replies
Last Post