What to do?
#1
What to do?
mk heres my updated pics take a look its got dents jacked up sheet tell me what i should do it what order.
:P
i have no interior took it out due to all the mold and nasty that would get in it after flood and ect. so Cut Loose!oh and i built that box myself and my buddy convinced me to port it when i did it sounded like pure **** so i just super glued a tennis ball in the port... worked great.
:P
i have no interior took it out due to all the mold and nasty that would get in it after flood and ect. so Cut Loose!oh and i built that box myself and my buddy convinced me to port it when i did it sounded like pure **** so i just super glued a tennis ball in the port... worked great.
#3
#4
#6
ya really sucks cause i have a fiber glass bed so in the bad floods my back ends floats... this year i had to jump out and push my floating back end into some ones yard to get traction lol damn 2wd! spare tires + 2 other tires pop my rear end right up lol i was flooring it and going no where so confused! but when i opened the door i flooded my cab XD
#8
its done fine so far the amp got soaked one day when i let my gf borrow my truck she left the windows down it didn't start up for a day the next day it dried out and worked fine. ^.^ but on the lighter side the amp and box are both on that ledge in the back that's about 8 or so inches above the part where Ur feet go.. so it doesn't get wet.
#9
its done fine so far the amp got soaked one day when i let my gf borrow my truck she left the windows down it didn't start up for a day the next day it dried out and worked fine. ^.^ but on the lighter side the amp and box are both on that ledge in the back that's about 8 or so inches above the part where Ur feet go.. so it doesn't get wet.
Recommend:
Cleaning the truck
Rollbar
Pipes
Toolbox
3 in Body lift
33s(and some 16 pro comps)
tuck those wires
bury the hatchet(lol)
winch
front bumper/grille guard
#10
man looks like a real nice truck in your avatar but in those pics it looks like it was beat.
I wouldnt even try to fix the tailgate, it will probably be cheaper and easier to replace it with a used one. The fender you could get a quote on getting it fixed and if its more then what you can buy a used one for then I would get a used one off another truck.
If your going to the beach, driving in the mud, and driving in high water often then you need lifted 4wd. If your going to sell that truck then its needs a serious cleaning inside and out. Looks like my truck does most of the time though so I cant talk much. lol
I wouldnt even try to fix the tailgate, it will probably be cheaper and easier to replace it with a used one. The fender you could get a quote on getting it fixed and if its more then what you can buy a used one for then I would get a used one off another truck.
If your going to the beach, driving in the mud, and driving in high water often then you need lifted 4wd. If your going to sell that truck then its needs a serious cleaning inside and out. Looks like my truck does most of the time though so I cant talk much. lol
#12
well i tow my buddies cars with a jetski if that counts... and ya i can get all the body parts form a junk yard and sand/paint/put on myself [thank god for my work]
#16
its metal on metal... theres no carpet take a closer looks ill just pressure wash it or use some on and off
#18
#19
ya in that case i can certainly clean it but my dogs tend to mess it up daily! every time i clean it looks real nice the fabric but my dogs mess it up within a few days :P i might just clean it and replace the pics for yall :P but my dogs are more important to me then clean seats
#20