New Member
#1
New Member
I am new to the site and would like to ask some advice. I have a 2004 4door Supercab Ranger Edge, it is a 4X2 ( I know wish I would have bought the 4X4 also but I interstate drive alot). Can you put a body lift on a 4X2 and would it look right? I would like to have it set up a bite higher and a more aggressive look. It has the stock 235/75/15's that are due to replace soon.
#2
#11
#12
spindles are REAL easy to put on... hardest part is gettin the ball joints out... go to a shop that does lifts.. talk to an installer and tell him you will take him out to dinner n **** if he helps ya put the lift on, on the side. dinner or beer, you dont know what some ppl will do for a case of beer haha
welcome
welcome
#13
#14
Originally Posted by Tom
I am new to the site and would like to ask some advice. I have a 2004 4door Supercab Ranger Edge, it is a 4X2 ( I know wish I would have bought the 4X4 also but I interstate drive alot). Can you put a body lift on a 4X2 and would it look right? I would like to have it set up a bite higher and a more aggressive look. It has the stock 235/75/15's that are due to replace soon.
I have a Fabtech Spindle Lift, larger blocks and a lift shackle, and a bit of torsion crank and I'm running 35's on my 2002, 4x2 Edge. I put an FX4 31 spline rear axle on, and a locker, and it offroads half-decently. Lots you can do with a 4x2 -- though I'm converting this to a 4x4 this spring with a SAS and so on.
Thread
Thread Starter
Forum
Replies
Last Post
waterboy
2.9L & 3.0L V6 Tech
10
07-21-2007 05:19 PM