Removed from my 98 Ranger 4x4 and was replaced with Explorer parts. Everything to convert your truck to free-wheel front hubs. Not sure of the mileage, but everything is in good condition. Sold the truck, removed these, the lift and tires.

Two used hubs for 4WABS. $150 pair.
Two used front CV axle shafts $150 pair.
Used Rugged Ridge locking hubs $100 pair
One new in the box front hub for 4WABS: $100

Located in Oak Harbor, WA. Will sell everything for $400. Shipping is available. I will get some pictures up soon.

 

I wish you put this up like three weeks ago. I just bought a pair of rugged ridge hubs for like $150.

 

i hate to do this to your thread but how did you gain anything from going rugged ridge hubs to your current set up? the rugged hubs are free wheeling......

 

^ me or him?

 

An older gentleman purchased the truck from me and he didn't want to get out and lock the hubs when he needed 4wd, so seeing as I was dropping the lift, I just used the explorer knuckles with the hubs and axles already attached to them. He won't drive it too much so he wouldn't see much of a difference in fuel mileage.

Sorry I didn't get any pictures yet...spent the day driving around buying and selling parts and picking up a 'new' project truck.

 

Anyone interested in any of this? I sure would like to get some of my space back.

 

if you get pictures of stuff people may gain interest. I'm interested in the hubs but I want to make sure they're not destroyed. inside splines, outsides, and the o-rings

 

all you have to do is ask, especially if you want specific pics. I will see what I can do.

 

Let me know if you need any different pics.

 

hubs and axles.

One of the ABS sensors came from my wrecked Explorer, so the wire was cut in the accident. Hubs were NOT involved in the wreck, I just needed the sensor for the Ranger.

 

Bump...this stuff is still available.

 

bump...still available and taking up room.

 

so my vacuum hubs are locked in on my 99. replacing them with the rugged rigde manual hubs will fix that right?

 

yes

 

how much with shipping to CT-06033

basically i take out the old and put in the new?

 

Looks like $12 for USPS Priority flat rate box.

Yup, just pull the old ones off and put these on.

 

New Prices

Two used hubs for 4WABS. $50 pair.
Two used front CV axle shafts $100 pair.
Used Rugged Ridge locking hubs $100 pair
One new in the box front hub for 4WABS: $50

Located in Oak Harbor, WA. Will sell everything for $250. Shipping is available.

Will take PAYPAL for payment.

 

Still available....

 

$75 for the hubs? Do you have the part # from them?

 

You'll need to put your pictures back up due to our recent site issue. I can help if you'd like.

 

Did you want the # on the Ruged Ridge locking hubs or the wheel hub assemblies?

The # for the wheel hub is pbr930342.
Ruged Ridge locking hubs is 15001.7

Let me think about that price...the wheel hubs go for around $150 each new and the Ruged Ridge hubs are $150-170 new.

 

if it helps at all those rugged ridge hubs are kinda hard to find anywhere else... I bought mine maybe two years ago and had to wait 6 months.

 

Ok let me know. Those are the ones I need.

 

Do you know what the mileage on is the 4WABS hubs?

 

I don't know how many miles were on the truck as the ex gauge cluster was swapped in when I got it, or if/when they had been replaced before.