OLD - Interior, Exterior, Electrical, & Misc. Ford Ranger interior, exterior, and electrical parts, i.e. overhead consoles, speakers, lights, bumpers, doors, wiring. This sub-forum is also for ads which list multiple Ford Ranger items per thread.

For Sale: Lvl II, Twin Sticks (No Knobs) - MA

 
Thread Tools
 
Search this Thread
 
Old Jun 3, 2010
  #1  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Lvl II, Twin Sticks (No *****) - MA

Asking $175 / BRO / + Shipping approximately $20
Both Sticks but no *****, Jam Nut and Locking PIn w/o Nuts included.
I put tape on the top of the stick to protect the threads, also so the Jam Nut does not get lost.
The piece of tape on the stick is holding the Locking Pin but there are no nuts.





No pic of the T/C Stick but will post when I take it.

Contact: after posting to thread
E-Mail: nnf000@gmail.com / PM
Payment: PayPal
 
Old Jun 3, 2010
  #2  
jharley79's Avatar
Member
iTrader: (1)
Joined: Apr 2009
Posts: 99
Likes: 0
From: Newnan, GA
I thought you needed a transfer case stick?
For whoever buys, i saw this **** on ebay.
Ford Ranger FX4 Level II shift **** transfer case NIB : eBay Motors (item 320536744390 end time Jun-20-10 21:37:38 PDT)
 
Old Jun 3, 2010
  #3  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
I am using the double Hurst stick setup another member of the site had the setup and I like it.

Looks good.
 

Last edited by Scrambler82; Jun 3, 2010 at 03:55 PM.
Old Jun 3, 2010
  #4  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
interesting in sell one?
 
Old Jun 3, 2010
  #5  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Right now No but give a little while.

Ask again further out !
 
Old Jun 4, 2010
  #6  
steev's Avatar
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
If you're interested in splitting them up, I'd take the trans shifter! I already have the t-case one. Just let me know.
 
Old Jun 4, 2010
  #7  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Originally Posted by Redneckstone
interesting in sell one?
Which one are you interested in ?

Originally Posted by steev
If you're interested in splitting them up, I'd take the trans shifter! I already have the t-case one. Just let me know.
IF I do sell them separately it will probably be as follows:

Trans Stick: $100 + ship $15

T/C Stick: $75 + shipping - not sure but should be less or the same as the other.

Let me know guys.
Redneckstone has to let me know which one he was talking about.
If this is a split sale then we are in business if you both wan the trans stick I will have to think about the split.

ltr/thks,
 
Old Jun 4, 2010
  #8  
Bumpncarstereo's Avatar
Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,302
Likes: 0
From: btwn the Buff and the Roc
put me in line for the transfer case stick as well.
 
Old Jun 4, 2010
  #9  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
If I don’t hear from Redneckstone tonight I will post the Sticks for Sale separately.
steev - has dibs on the Trans Stick
Bumpncarstereo - has dibs on the T/C Stick.
 
Old Jun 5, 2010
  #10  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Redneckstone said he wanted the Trans Stick so that for the moment is on hold.
steev you have the T/C Stick if you want it.

PayPal - nnf000@gmail.com, those are zeros.
 
Old Jun 5, 2010
  #11  
steev's Avatar
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
I wanted the TRANS stick, not the T/C stick...
 
Old Jun 5, 2010
  #12  
Bumpncarstereo's Avatar
Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,302
Likes: 0
From: btwn the Buff and the Roc
am i still on the top for the transfer case?
 
Old Jun 5, 2010
  #13  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
OK sorry steev.

As of right now… Redneckstone e-mailed me and asked for the Trans stick so the T/C is all i can sell.

The only one asking for the T/C is Bumpncarstereo so send the money + shipping to my PayPal and you got it. (nnf000@gmail.com)

If Redneck pulls out then the Trans stick is up again for steev to refuse.
 
Old Jun 5, 2010
  #14  
steev's Avatar
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
Sounds good...no worries. Don't NEED it, just WANT it!
 
Old Jun 6, 2010
  #15  
Bumpncarstereo's Avatar
Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,302
Likes: 0
From: btwn the Buff and the Roc
Originally Posted by Scrambler82
OK sorry steev.

As of right now… Redneckstone e-mailed me and asked for the Trans stick so the T/C is all i can sell.

The only one asking for the T/C is Bumpncarstereo so send the money + shipping to my PayPal and you got it. (nnf000@gmail.com)

If Redneck pulls out then the Trans stick is up again for steev to refuse.
shipping to 14020?

Thanks
 
Old Jun 6, 2010
  #16  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Originally Posted by steev
Sounds good...no worries. Don't NEED it, just WANT it!
Originally Posted by steev
I wanted the TRANS stick, not the T/C stick...
steev, Redneck just declined to buy if you want it PayPal me the funds.

Originally Posted by Bumpncarstereo
shipping to 14020?

Thanks
Shipping for each stick will run approximately $12-15 max.
Send the $15 and I will return all unused postage via paypal.

My PayPal: nnf000@gmail.com, those are zeros.
 
Old Jun 7, 2010
  #17  
steev's Avatar
Member
iTrader: (2)
Joined: Sep 2008
Posts: 138
Likes: 0
From: Grand Rapids, MI
Payment sent!

Anyone know if the shift **** thread pattern between the FX4 and Hurst shifters are the same??

And if the TC shifter hasn't been sold yet, someone needs to buy this thing ASAP. It really does look great in the truck!

-steev
 
Old Jun 7, 2010
  #18  
Dangerranger01's Avatar
Member
iTrader: (6)
Joined: Nov 2005
Posts: 2,011
Likes: 2
From: Boring/Corvallis, Oregon
Originally Posted by steev
Payment sent!

Anyone know if the shift **** thread pattern between the FX4 and Hurst shifters are the same??

And if the TC shifter hasn't been sold yet, someone needs to buy this thing ASAP. It really does look great in the truck!

-steev
Hurst is a 3/8 thread, LII is a M10 i think.
My brother modified his LII to thread onto the hurst. It is quite badass.
 
Old Jun 7, 2010
  #19  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Originally Posted by steev
Payment sent!

Anyone know if the shift **** thread pattern between the FX4 and Hurst shifters are the same??

And if the TC shifter hasn't been sold yet, someone needs to buy this thing ASAP. It really does look great in the truck!

-steev
Got it , Thanks !

They are not the same, the Lvl II is larger but I do not know what it is, sorry.


Originally Posted by Dangerranger01
Hurst is a 3/8 thread, LII is a M10 i think.
My brother modified his LII to thread onto the hurst. It is quite badass.
There it is… I will be looking for a T/C **** for my dual Hurst setup.
 
Old Jun 7, 2010
  #20  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Trans Stick is SOLD !

T/C Stick is still Pending !
 
Old Jun 7, 2010
  #21  
Bumpncarstereo's Avatar
Member
iTrader: (3)
Joined: Aug 2006
Posts: 1,302
Likes: 0
From: btwn the Buff and the Roc
m10 x 1.25 i believe. it has been a while since i made my ****.

and payment sent for the t/c
 
Old Jun 7, 2010
  #22  
Scrambler82's Avatar
Thread Starter
|
Old Guy User…
iTrader: (12)
Joined: Jul 2009
Posts: 7,909
Likes: 78
From: SoCal
Originally Posted by Bumpncarstereo
payment sent for the t/c
Check out your PMs.
Thanks
 
Old Jun 10, 2010
  #23  
TrePaul86's Avatar
Member
iTrader: (8)
Joined: Apr 2007
Posts: 1,369
Likes: 3
From: Gresham, OR
Originally Posted by Dangerranger01
Hurst is a 3/8 thread, LII is a M10 i think.
My brother modified his LII to thread onto the hurst. It is quite badass.
AHHHeMMM... And who showed him this trick? lol
 
Old Jun 10, 2010
  #24  
Dangerranger01's Avatar
Member
iTrader: (6)
Joined: Nov 2005
Posts: 2,011
Likes: 2
From: Boring/Corvallis, Oregon
Originally Posted by TrePaul86
AHHHeMMM... And who showed him this trick? lol
...a machinist he did a small job for....Way moar fly than a hacked bolt adapter....ouch, u got powed!
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ranger_1999
OLD - Ranger Based Vehicles
21
Jul 11, 2010 05:29 PM
Ranger_Envy
1" & 3" Body Lifts
3
May 23, 2010 10:28 PM
BonesDT
Drivetrain Tech
20
Mar 20, 2009 10:42 PM
moelll
General Ford Ranger Discussion
8
Nov 24, 2008 04:20 PM
Downey
Snapshots
19
Nov 21, 2008 12:11 AM




All times are GMT -6. The time now is 05:51 PM.