parting out 99 ranger (PA)
 

http://<center>[IMG]http://http://i97.photobucket.com/al...peDiemxx/1.jpg[/IMG]I have a 99 ranger with the 4.0 ohv motor, auto trans and 4x4. The truck took a hard roll and the only body parts that are good are the pass side doors and the front fender has only a small dent in the wheel well lip. The rear end is junk but the posi and gears should still be good. Interior pieces are all there but the radio was scavenged. has canter console but no arm rest. Open to offers on anything on the truck. The truck has 100 k
http://s97.photobucket.com/albums/l209/xxCarpeDiemxx/


Pricing
Motor 400
auto trans 300
transfer case 175
pass doors 50 and 35 od 75 for both
seats 50, grey tweed in pretty good shape
center console missing arm rest BO.
8.8 trac loc w/ 373. axle took hard hit but it should be fine, 50
4 rims 20 a piece, stock aluminum, decent shape
Interior pieces BO. Grey interior, cig assembly bad. Crack in radio surround. I'll post some pics late tonight
Bed sides are not that bad and can be fixed and will go very cheap. BO
Front pass fender 30, slight crease in wheel arch.

Got any pics that you can post??

how much for the rear drive shaft

What is the rear axle code? I am looking for a rear end.

I'll get pics tonight

The rear took a mighty shot and the only thing that might be good is the trac loc and gear

pic of the interior please

Any chance you have anything off my list?

-Pass side door lock actuator
-Window Switches
-Door Lock Switches
-Door moldings (piece on exterior part of the door which seals against the window)
-Center Console (Black if possible)
-Cluster (ranger/white sport trac)
-Front valence for foglights the oval sorta type
-Cruise control steering wheel buttons (the ones that are sorta teardrop shaped I guess you'd say)
-Seats
-Radio Cluster
-Carpet moldings (hold's down carpet in the doorway)

If you could lemme know what you got/prices. Can pm me if you'd like.

Andrew
__________________

<a href="http://s611.photobucket.com/albums/tt199/popeye010/?action=view&current=truc.jpg" target="_blank"><img src="http
Lets see if this works

What do ya want for the engine?

I should have most everything except the center console. The radio was pulled and some wires cut. the molding and the frame is there but the molding has a light crack in it. The seats are a light grey twead and are in decent shape. jump seats are also avaiable and I don't think the clusters are white. I'll let you know on the avaiability on all the items. I have no idea on the pricing so give me an offer on the list.

ok shoot me some pictures of everything and we can go from there.

Andrew

Are the mirrors manual?

ok, what about front skid plate, front valance with fog lights?

Interior shots?

How much would you take for the mirrors? oh and are they manual or power?

400 for the motor and it ran well and is fairly clean.

Only passanger side mirror. elec, $35

initial post updated with prices still waitng on the photos

I'm having no luck with these damn photos
http://s97.photobucket.com/albums/l209/xxCarpeDiemxx/
Try to go to this page

i need the passenger side airbag on/off switch...

Is the front bumper and valance any good? Price??

I need some weird parts for the race truck.

Line that goes into the power steering rack, and the slide clips that lock the front headlights into place.

Not perfect but I do have aphoto of it, let me put them on photobook.