I've decided that after riding in my buddies F150 I'm going to be doing the Fullsize mod as well so I'm going to let some of my stuff go. I have two Level II twin stick setup's. The first one is pretty complete (depends upon your year)

Twin Stick setup #1
*It comes with the floor plate (discontinued from Ford) very rare and $$$
*The two shifters with ***** (shift **** has a scuff or two on it nothing bad)
*Two sets of shift boots (both T-case boot rings are broke but they still clip in and hold)
*The bezel all mounting holes are there, one or two are cracked but most of the time one or more are broken. (obsolete)
*Brand new with Ford box RCM cover (obsolete)
*correct Level II T-case linkage (also super rare and hard to find as most are left with the truck when they go to the crusher.)
If you're looking to stick this into an 01+ truck you'll need the correct Lvl II tailshaft housing (or the custom brackets that have been sold on here, speed sensor, and T-case. If you have a 99 or older truck you just need a T-case..
Individual item prices.
$125 shipped for the tranny shifter, **** and boot.
$105 shipped for the Tcase shifter, ****, and boot.
$75 shipped for the bezel and boots.
$150 shipped for the floor plate.
$55 shipped for the T-case linkage.
$45 shipped for the RCM cover (New in box)
or I'm asking $425 + shipping for all of it.

[IMG][/IMG]


The second is a set of Level II tow hooks, they're currently still on the truck. Here is them cleaned up and the black repainted.

$100 + shipping...Sale pending.

Lastly- 1 COMPLETE Level II twin stick setup. This is currently in my truck but here is what you'll get.
*Level II Tail shaft housing. (bought new 3-4 months ago)
*Level II speed sensor (1 month old)
*Twin stick shifters (With nice *****)
*Shift boots (No cracks in the retaining rings)
*Level II Floor plate
*Level II T-case Linkage
*Level II Transfer case (80K on it and like new)
*Level II RCM cover
*Explorer 2wd Radio bezel painted silver with 2 switches on it.
*Custom wiring harness and GEM module so the dash 4x4 lights work like factory (no cutting of any wires!) Will work on an 04 but may require changes for other years.
This is everything you'd need to put to convert your truck to twin sticks. Everything looks great and it functions like new as well. I took the best of the parts from my two setups and its all in this group. I'm asking $800 for the setup. I have pics of the this setup going in but its still currently in the truck. I'm looking for someone local. If I don't get a fair price I'll let it go with the truck when I sell it.
This not everything but this is part of the setup prior to going in the truck, it'll give you an idea.
URL=http://img84.imageshack.us/i/level2setup.jpg/][/URL]

 

ok, i have an '03 level II with an automatic, and Ive thought about making it into a manual transfercase vehicle but keeping the automatic trans. what would I need?

 

I'll pm you as this will end up turning into a tech thread.

 

Why are you selling the truck?

Nevermind. haha

 

He could buy the t-case shifter and I could buy the trans shifter with boot

 

I may end up parting out everything but I'll try it complete first. Setup number 3 will probably go on Ebay.

Oh and the boot wont fit on your truck with out modding which would be a shame to do to an 02-03 Level II boot. All other shifter bezels have square holes and the 02-03 Level II bezel has a round hole.

 

Will you take $100.00 shipped to area code 27577? Please let me know.

 

Oh I know it would. Doesn't bother me.

 

if you decide to part out, keep me in mind. i need everything but both arms.

edit, nice solar lights from wal mart by the way.

 

For what? There is a lot of stuff I have posted.

 

You need everything as in T-case and all that stuff? or just the interior stuff. What all are you needing. I'll probably part out the 1st setup so let me know exactly what you need.

 

For the tow hooks

 

Not at this time. I'd really like $100 bill by the time I'm done shipping them. Shipping should be cheap as they'll fit in a flat rate box. So $108 shipped.

 

well i doubt you would want to ship a tc from KS. but i would be looking for the shifter linkage, boots, *****, floor pan, floor plastics,

thanks

Dan

 

pm sent for a cover.....

 

PM sent.

 

I will give you $75 plus shipping for just the manual shifter stick and ****. You can keep everything else.

 

Uhhh, no thanks. Dealer cost on the **** is probably close to that. I think going rate for a shifter plus **** would be $125ish+ shipping. I'm just waiting to hear from Bumpnstereo. If he'd get back to me on everything but the sticks then I'll price the stuff out piece by piece.

 

Put up individual part prices.

 

to install just the shifter into my 08 xlt, do i need the plate or linkage that is rare?

 

I assume you're talking about the transmission shifter. To install the shifter, its a direct bolt in replacement of the factory shifter.

 

yea, that is what i meant. so that part is $125?

 

Yes, that is correct. I'd have to check on shipping costs to Canada as if it costs a fortune then that might change. I've forgot that so many of our members are Canadians.

 

Pm'd about tow hooks. On another thought I'll take your push bar... ha... If you cover shipping. "Joking" lol

 

Ok, ok $100 shipped on the shifter w/ ****. I can't go any higher, I just bought a $330 rear axle, and I have other expenses on the way.