Ranger-Forums - The Ultimate Ford Ranger Resource

Ranger-Forums - The Ultimate Ford Ranger Resource (https://www.ranger-forums.com/)
-   OLD - Ranger Based Vehicles (https://www.ranger-forums.com/old-ranger-based-vehicles-104/)
-   -   2003 Ford Ranger 4.0L Engine, Supercharger, Transmission, BW1354, etc... (IN) (https://www.ranger-forums.com/old-ranger-based-vehicles-104/2003-ford-ranger-4-0l-engine-supercharger-transmission-bw1354-etc-97716/)

zabeard 11-21-2009 07:35 PM

2003 Ford Ranger 4.0L Engine, Supercharger, Transmission, BW1354, etc... (IN)
 
3 Attachment(s)
First of no Dibs! I hate Dibs so if your interested you need to PM me or post in this thread.

Little history... 111,500 miles on the engine and transmission. The Engine has had the oil changed every 10k miles with Mobil 1 Synthetics it does not burn any oil at all. Around 108,000 miles I installed the supercharger from Explorer Express which was about a year ago. I dont drive it much at all.

The transmission has had the fluid changed every 20k-25k miles. Around 90k miles I dropped the transmission and installed an upgraded valve body, with multiple shift kits, new servos, seals, torque converter, etc... I will admit I was never really easy on it, but it has never failed either. I dropped it because I felt it needed some improvements for my needs.

The manual transfer case is out of a early 90s explorer. I have no idea on the miles, works good, has the shifter setup everything. Small leak and one of the studs for the balancing wheel broke off from a rock.

This setup really works well. It will just open up and take off. If you dont believe me ask anyone that has seen me at the dunes, it will go... if I could make a rough guess id say over 300hp at the crank easy.

Several selling options... I will part it out, but if someone is interested in the whole thing...

$3500 - 4.0L, Explorer Express supercharger, JBA headers, 5r55e trans, 1356tcase, pcm, Xcal2, all wiring, all engine accessories, MAC intake tube, K&N filter, custom tune from bamachips, etc...

Separate -----

$2400 - Explorer Express Supercharger, everything needed to install, pullies, belts, hoses, injectors, XCAL2, custom tune from Doug at Bamachips, etc... This kit works with 2003 with no EGR or 2004+ with EGR, I have some of that but it may require additional parts, overall this will work on any SOHC 4.0L but may require some research on your own part.

$600 - 2003 SOHC description above, comes with PCM and wiring.

$200 - JBA Headers

$250 - BW1354 Tcase

$450 - 5R55E




picture of it all complete...

Attachment 128890

Attachment 128891

Attachment 128892

Metro55 11-21-2009 07:48 PM

FFFFFFFFFFF... I want it!!!

zabeard 11-21-2009 07:51 PM

considering the Explorer express kit is 4200 alone its not a bad deal! you know you want it...

Explorer Express- Ford Ranger - Ford Explorer - Ford Mustang Performance

Lord Of War 11-21-2009 08:03 PM

DIBS!!!!!!!!!!

yellow rhino 11-21-2009 08:08 PM

only if that stuff would work on a 3.0...

Blhde 11-21-2009 09:10 PM

I bet that was the easiest engine pull ever.

I hope the front half goes well for you zach. Maybe some 2x5x.250 box steel and make a new frame for whole truck.

zabeard 11-21-2009 09:54 PM


Originally Posted by Blhde (Post 1532929)
I bet that was the easiest engine pull ever.

I hope the front half goes well for you zach. Maybe some 2x5x.250 box steel and make a new frame for whole truck.

The front half is already done.

Roach2004 11-21-2009 09:57 PM

I bet shipping would suck on the t-case wouldn't it?

HighRollerII 11-21-2009 10:00 PM

i bought a new tcase beginning of the week from cali to Sc 175 pounds it was 150 in shipping...

Roach2004 11-21-2009 10:02 PM

Damn thats out of my price range considering I just dropped most of my money on a D44. Guess I need to worry about getting the axle under there rather than converting to 4wd right now.

NicksterSVT 11-21-2009 10:57 PM

does that awesome frame setup come with it??? i might be interested.... i gots a truck in the shop right now that needs a motor!

effexfour 11-21-2009 11:57 PM

Are those headers the ceramic coated ones? and I assume they will also fit an 04 as well as an 03?

95offroadx 11-22-2009 12:14 AM

intrested in the headers..does it include a larger ypipe?

Blhde 11-22-2009 01:36 AM


Originally Posted by zabeard (Post 1532938)
The front half is already done.

I cant believe i missed that entire project thread. GD


Nice work, monster progress on that.

JoshK 11-22-2009 06:13 AM

Thats a awesome deal! Just to let everyone know this set up did very very well compared to a stock engine....Sounds good too!

Wish I could use it for a sand rail!

07silver4.0Lsport 11-22-2009 08:21 AM

would those jba headers fit on my 07 4.0l?

seed60 11-22-2009 08:27 AM

Did you take this stuff back to Indiana or is it still at Nick's?

Let me see if I can scrape up the money for those headers.

NicksterSVT 11-22-2009 08:35 AM


Originally Posted by JoshK (Post 1533026)
Thats a awesome deal! Just to let everyone know this set up did very very well compared to a stock engine....Sounds good too!

Wish I could use it for a sand rail!

wow, josh can actually speak, i thought your vocabulary was limited to "hell yea" lol

JoshK 11-22-2009 08:54 AM


Originally Posted by NicksterSVT (Post 1533048)
wow, josh can actually speak, i thought your vocabulary was limited to "hell yea" lol

Hell no Nick!!!!

Off-roadranger04 11-22-2009 08:05 PM

Hm im interested in the T-case...

zabeard 11-22-2009 08:23 PM

bump! let me know. Prices do not include shipping.

I am offering this to you guys first in a week or so everything goes to ebay.

Roach2004 11-22-2009 11:37 PM

God if you were down here I would take the Engine/tranny/tcase off you. Not the Supercharger.

NicksterSVT 11-23-2009 12:07 AM


Originally Posted by Roach2004 (Post 1533578)
God if you were down here I would take the Engine/tranny/tcase off you. Not the Supercharger.

go get it!

zabeard 11-23-2009 05:55 AM


Originally Posted by Roach2004 (Post 1533578)
God if you were down here I would take the Engine/tranny/tcase off you. Not the Supercharger.

make me an offer. maybe it wont cost that much to ship. never know until you look it up

zabeard 11-23-2009 08:23 AM

bump


All times are GMT -6. The time now is 03:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands