Hey guys I have a 4" superlift that I bought for my 99 ranger and i just can't afford to do it at the time. Have too many other things I need to focus on so I must sell this. Still in the boxes with all hardware and instruction manual. Asking $1,600. Ad can be seen below. Please call or text me as i don't get on here much. 816-405-5323

 

want it... whats shipping to ottawa ontario?....and does anyone know what the extra hardware includes in the newer lifts? something they added on after

 

Very tempting.. Knuckles and all??

 

Did you read the description?

 

Sure did. In the past I've seen people sell kits they called complete, but it wasn't the master kit that had the knuckles. I believe they had different part numbers.. With no picture i had to ask. The question should be, why did you feel it was necessary to even respond?

 

According to Superlift there is only 1 complete kit, which includes all the necessary hardware for the lift.

I would assume that since his kit is still in the boxes then all the parts are there

 

bump for a good price

GB :)

 

https://www.ranger-forums.com/suspen...ew-kit-136357/

Although the original post says complete kit, this thread supports that uncertainty. I'm not playing devil's advocate or trying to start trouble but I am concerened as I am buying a SL this spring. If this is still available, I might be interested.

PS, in the OP it says "ad can be seen below". Where?

 

Morris you're right, I forgot about that thread. I was going off Superlifts site info

 

x2

According to what he mentioned in that other thread, he purchased a couple component boxes for a 98-99 Ranger (not the overall master kit).

Also, it should be noted that depending on what boxes he actually purchased - it can only be used on 98-99 model year Rangers (See my link below for the breakdown). The new owner may need to purchase another component box in order to install the setup on a '00+ Ranger. You would need to still get the '00+ Superlift knuckles (Part #9637, $500-$600) - Since they are different from the 98-99 Superlift ones (Part #9630).

I would request part numbers on the boxes to verify what he has & doesn't have.

Here is the link to the specific post where I break down all of the Superlift component boxes for the different model years: https://www.ranger-forums.com/suspen...7/#post2020807

 

Thanks Logan.

 

Good info Logan, I forgot that 98-00 had a different kit

 

this is his ad i'm guessing he meant to post

98, 99 Ford Ranger 4" Superlift. Brand new in the box

 

Thanks kewn

 

No problem guys....hope my prior research helps!

 

Sorry for the delayed response guys. Been hectic at work. There are two separate kits. This kit IS the complete front kit with the steering knuckles for 98-99 rangers. The rear blocks I didn't get as I wanted to go with new leafs but those were never purchased so this kit is complete for the front with all 4 shocks but you will need either blocks, or new leafs for the rear.

 

This could be a good opportunity for someone to just purchase the front suspension lift and get something much better than the stacked blocks Superlift wants you to use.

Basically you would have 2/3rd's of the component boxes for the master kit (aka - entire front lift, all shocks, but nothing for the rear - which is just the blocks).

To Recap:

He Has:

• Box #9631 Contents: Product Information (9631) • Superlift • www.superlift.com (Front - Minus the Knuckles)
• Box #9630 Contents: Product Information (9630) - Superlift - www.superlift.com (Only the Knuckles)

He Doesn't Have:

• Box #2338 Contents: Product Information (2338) • Superlift • www.superlift.com (Rear setup - Just cheap blocks)

 

So if I bought this kit from him, I would have to buy the 01+ knuckles for the larger brakes.

 

Yep.

However, it’s not solely because of the larger brakes – The Ranger brake size change didn't occur until the mid-2003 model year.

Superlift lists a different knuckle component box for anything over a '99. The master install kits (aka - the true entire kit) has a different part number for '98-'99 versus '00-'09 because some of the components are different.

From the post I referenced earlier (https://www.ranger-forums.com/suspen...7/#post2020807), I provided a breakdown of what's included in each of the different 'Master Install Kits' depending on model year. When comparing the kits across the model years, two out of the three component boxes share the same part numbers (aka - interchangeable), but the knuckle component box has a variance in part numbers (aka - different).

 

Does the sell include the SL drive shaft?

 

Just in order to keep butting in here.... LOL

I'm betting it doesn't come as part of the sale.

It's not part of the base lift kit - It's a 100% seperate Superlift part all together.

 

Morris, If you need the front box kit which has all the drop down brackets and all the hardware in stall it, I can sell you all those parts and all you would need to get after that is the 01+ knuckles and then something for the rear. The front kit alone I paid over a grand for and the knuckles were almost $600 but I can separate them if needed.

And no the superlift driveshaft is not included or this would be a $2,000+ kit lol.

 

Also just throwing this out there but if you happen to have any AR parts or even a complete one I would be willing to trade lol.

 

Thanks Jason. I'm not looking to buy right this minute, but come the spring it's either a SL/tires/gears or coil overs. I'd like to do both/all but I do wanna do some Reno on the house.

 

I understand man.