I got a spindle lift for torsion type rangers or Mazdas. Its for the smaller size rotors. So it wont fit mine. Shoot me a pm if your interested. Trying to get atleast 175 for them. Obo. Shipping might be a alot. Up for trades!


Lakeland, Florida

 

3 inchers or 5.5 inchers? i assume they are fabtech brand.

 

3 inches. And im unsure what the brand is i think its doestch i can post a pick soon

 

I was just asking for others.

Too bad they are torsion bar though. I just paid $450 for some doestch coil spring ones new from ORW. $175 for them would have made my year. And they would have been the 98-00 so I could use my own rotors. Crap.

 

dang that sucks lol

 

okay hold them because i need them .... are they just bigger spindles? my brake bolt striped out and i need new spindles so when i get the money ill get them from you

 

they are lift spindles. so the front will lift up 3 inches with these. i believe stock wheels no longer work when these are installed. also your front brakes will be a little weird.

 

ill but wheel spacers so theres clearence ..... and wat u mean byh weird lol

 

i guess on spindle lifted edges when you turn the wheels to full clock the calipers get pushed back out by the a-arm and you loss brake pressure.

 

ohhh i could try to rebuld some of it and figure out how to do it ... do u have longer brake line on there cuz that is usually the issue with loosing bpressure cuz the short brake lines get pinched

 

could you email me some pics????? crnf93@aol.com

 

Id like to buy these but im not sure what rotor size i got on my truck. If they end up fitting i will buy them asap. Been looking for quite sometime.

Thanks,
Andrew

 

you have 01+ rotors so they would fit

 

Its for 10.25 rotors. I dont think itll fit yours. Unless you buy some used ones from the junkyard

 

to answer the brake caliper thing- you just need to make your own new bump stop, the factory one hits the caliper at full turn and you lose brake power...so just grind off the factory one, and have your own welded or bolted on, simple fix.

also, on the size of them, they are the same size as stock, different shaped but still same size, the part that gives the lift, is where the tire/rotor bolts on is moved down 3" and near the bottom of the spindle, instead of in the middle of it. hope that makes sense?

 

Well i need a definite answer, if i got 01+ rotors they will fit? How do i check which size rotors i got? If these will fit ill buy them now