home built projects
#1
home built projects
ok ladies and gentlemen
got a new tubing bender so i thought it was time to start on some projects i've been wanting to tackle
i love the convenience and look of the tire gate so i decided to start with that sense im more of a BAJAer i went with the prerun
i have little pictures so far but i will update as progress goes on
also my ADHD kicked in and i decided to paint my badges
got a new tubing bender so i thought it was time to start on some projects i've been wanting to tackle
i love the convenience and look of the tire gate so i decided to start with that sense im more of a BAJAer i went with the prerun
i have little pictures so far but i will update as progress goes on
also my ADHD kicked in and i decided to paint my badges
#4
#5
#9
#11
The tubes houses a 6 in bolt (pin if you will) that is spring loaded and is held down by a set screw so it wont back out then i got 3/4in bar stock and made a L handle and welded a washer on it with a side cut off
When you put the L handle in it pushes the bolt down to pose as the bottom pin
The bracket mounted on the truck has a tiny peace of angle so you can put the L handle and turn it to lock it in
If you need any further explanation please let me know ill be happy to take extra pics
So far it works good! cant wait for it to be done so i can start on my next build that i saw on the KC Hi-Lights pit truck i saw in vegas a while back at a pre-runner race pics of this will come soon
#12
#14
#15
#17
#24