Time to make a thread
 

Im pretty decent at google sketchup so I modeled the truck that Im working on building.
here it is
Attachment 78912

Attachment 78913

Attachment 78914

And here is how my truck sits today

https://www.ranger-forums.com/attach...ine=1337222457

https://www.ranger-forums.com/attach...ine=1337222457

Im driving 3 hours away on Sunday to get the fleet side bed and plastic flares for my truck.

Nice work... so is there a basic Ranger to start with and then you just added tires and bumper and all that?

I want to add an electric rear locker and im not sure what else. The tires arent going to be like those ones those either. That was just a basic for what it will look like and im making all the bumpers and brush guard.

You don't have leaf springs in the rear. ;)

Beat me to it! :scool:

That's because it's just a quick rendering it dOesnt have an engine either or seats to a steering wheel or tranny or drive shafts. I'm just gonna make it look like that and then probably so a 5.0 swap and some other stuff

Well it's been awhile since I updated this. I kinda forgot about it. But here she is sitting today.

https://www.ranger-forums.com/attach...ine=1353713988

I added a summit racing sun visor and a tool box. I got 2 8" JL AUDIO subs and phantom LEDs.

Also bought a trailer hitch from a friend and repainted it.
https://www.ranger-forums.com/attach...ine=1353713988

Next thing to do is an explorer axle swap and procomp simulator bead locks.
Hopefully it will be on its way here soon

My dad got jealous so he went out and bought this
https://www.ranger-forums.com/attach...ine=1353713988

Not fleetside yet? Thought you bought one?

I was going to but I changed my mind. I like the stepside because I will never have to worry about rust and I did want to have to drive that far to swap beds

Laaame. Fleetside gets all the ladies.

Its gonna look bad ass when your done.

Well i got alittle done today. I went to the junkyard and found a new center console for my dads sport-trac and a radio bezel for mine. if youre wondering why the radio bezel you will have to just wait and see but anyway.

My dads new center console. I cleaned it the best i could and the plastic looks almost new
https://www.ranger-forums.com/attach...ine=1353816803

Next i took his old arm rest and fixed it up for myself
https://www.ranger-forums.com/attach...ine=1353816803

For the normal armrest problem I fixed it with 2 pieces of metal I cut off some old tractor parts
https://www.ranger-forums.com/attach...ine=1353816803

And last but not least my radio bezel all cleaned up
https://www.ranger-forums.com/attach...ine=1353816803

Not to bad for junkyard parts.
Next time im going to get an explorer console and the explorer rear end.

Defintaly getting 06+ mirrors too. anyone know the price or where to get them? our junkyard doesnt have nice shit like that

ok thanks they are 50 bucks shipped to my door so I will see if i have enough after I sell my tractor to get those too.

After I can sell my Cub Cadet 108 tractor Im going to buy an explorer rear end and Im going to try to get leaf springs with it too and just upgrade to the explorer springs and them crank on my torsion bars to try and level it the best I can. I will also be getting new procomp simulator beadlocks.

The rock auto fix for the arm rest is great, easy to do too.

The truck will look good, more rugged look.

Well I got my OHC today

https://www.ranger-forums.com/attach...ine=1354505672

Forgot to get the mount too and didnt want to wait so I made my own POS mount.
But shes in and here she is

https://www.ranger-forums.com/attach...ine=1354505672

I found the perfect spot to mount mytemp. sensor
https://www.ranger-forums.com/attach...ine=1354505672

There was alittle tab right in the middle of the grill so i pulled it out and and boom done!

The radiator might affect the temp reading if the trucks not moving fyi.

Well the spot it was on the explorer was pretty close to the radiator too so I don't think it will affect it that mich

IIRC they are off to the side slightly wich is further but you're prolly right. Should be fairly close at least.

I'm going to build 2 8" sub woofer enclosures in my woodshop class to fit where the jump seats are. I plan on using the jump seat fold out design to make the speakers easy access to the rear and make it look factory

Well got some rims from a friend but guess what I NEED ADAPTERS!!! good thing i havent paid him yet.

anyone know where i can get adapters to go from 5x4.5 to 5x4.75 or does anyone wanna trade me for the right ones? or even want mine? lol


heres the wheels

https://www.ranger-forums.com/attach...ine=1354744409

Well im going to order the adapters off ebay this weekend so i can put those wheels on. I also want to swap my heater box with one out of an explorer because my junkyard doesnt have many rangers and myheater door is broke in the box. Does anyone know if this is a possible swap?

updated my google sketechup file alittle bit.

https://www.ranger-forums.com/attach...ine=1354858355

changed rear axle to 8.8 and lifted the front to match and changed rims. all future plans for my truck.

I wish I could figure Sketchup out. lol