Code 542 94 Ranger 3.0 2WD
Thread Starter
|
Member
Joined: Feb 2024
Posts: 9
Likes: 1
From: Glendive, MT
Code 542 94 Ranger 3.0 2WD
Hi
i have 94 Ranger 3.0 2WD. Having crank no start issues. Does fire occasionally and will run until applying throttle and will sputter and die. Only significant cost is 542. Have put a new pump in and did get 12 volts at pump with key on. Relay tested and on and tried a different relay to no avail. Checked interia switch and that is good. Replaced fuel pump, PCM, PCV value. Took to shop and was told PCM but apparently was not the issue. Looking for any thoughts before loading with tannerite.
i have 94 Ranger 3.0 2WD. Having crank no start issues. Does fire occasionally and will run until applying throttle and will sputter and die. Only significant cost is 542. Have put a new pump in and did get 12 volts at pump with key on. Relay tested and on and tried a different relay to no avail. Checked interia switch and that is good. Replaced fuel pump, PCM, PCV value. Took to shop and was told PCM but apparently was not the issue. Looking for any thoughts before loading with tannerite.
Thread
Thread Starter
Forum
Replies
Last Post
benjo004
Ranger-Forums Office
1
Apr 20, 2022 08:37 PM
