Do i own the only POS 2002 ranger?
Do i own the only POS 2002 ranger?
Ok my AC wasn't working so i lifted the hood figured low coolant.. WRONG!.. the Clutch fell off the front of that compressor..LOL $81.00 at autozone. Anyone else having weird abnormaly stuff with their ranger?
WD-40 doesn't work well for this, it drys out and attracts dirt. Use some brake cleaner to clean the latch out. Dry it with air or time. Then use a silicone spray. It works far better.
thanks for the tip man!
same thing happened to my dodge work truck. The bolt that holds the clutch sheared off.
haha mine too! and now my key is starting to get stuck in the ignition....
My passenger side rear drum brake seizes up every few months and makes that horrible worn disc brake squeak, if I let it go to long it go too long it seizes completely and locks the brake. I've replaced all the hardware once already. I think it's the master cylinder. Oh well, easier to take it all apart and rebuild it every month than replace the whole deal.
thats normal, the p1000 code appears after the codes are cleared you may never get rid of it, ive seen vehicles with 100,000 miles that still has that code, if you have that code all it is telling you is that there is no problems since last time codes were cleared
My driveshaft fell out on the highway about a week ago and when i took it in they realized that the u-bolts on my axle were not tightened and were just swingin in the breeze, lol. $700 fix
. But mines a 99
. But mines a 99
You might want to make sure you have a fire extinguisher inside the truck. Nobody likes to be on fire while driving their truck.





