Im 16, i dont have a licence and ony a permit. i want to know if the fx4 rims will fit on my truck? Its an 2001 Ranger Edge edition stick 2wd. any help would be great! Thanks.

 

Yes I believe so

 

And welcome Matt!

 

Which rims you talking about? the FX4 15" Alcoa's or the 16" Y Spoke ones?

 

Both should fit though, I think? I am pretty sure the newer y spokes have different backspacing than the alcoas... But again I only THINK so

 

thanks for the reply buy can you post a pic of both? i cant seem to find the diffrence.

 

Look at the wheels on lazlers truck^^^^^. he has the dsg alcoas which also come in polished aluminum. The y spokes are the new style wheels. I forgot you are two wheel drive. I have heard that some wheels won't fit the front spindle because of the sizeof the bearing dust cap

 

...

 

would i haft to lift it to use the any of the fx4 rims?

 

No but you might have to machine out the center bore of the rims to fit over the wheel bearing dust cap

 

I think the only fitting issue with FX4 wheels on the 2wd trucks was actually the center caps...gotta do some trimming inside them to get them over the dust cap, but thats it.

 

he shouldnt have to do anything to his centercap I dont think because he has an edge, i could be wrong though

 

laz has an edge and he still had to trim it, its just cos the dust cap hits it a bit. i actually think someone on here did a write up on how to trim them

 

oh ok, i couldnt remember

 

Ignore all these "should fit" post. It will fit.

 

By the way, I'm 16 also so if you have any stupid questions or anything feel free to PM me.

 

i know it will fit, its the centercap on alcoas i couldnt remember about for Edges. I knew for coil sprung 2wd, you have to trim the lip down on the alcoa centercap

 

15" Alcoa's:
DSG Alcoa:

Polished Alcoa:

Brushed Alcoa:


16" Y-Spokes:

 

i see my truck!

 

I really lke the 16' y-spokes. how much a rim are they?

 

depends on where you get them from, if you go to a dealership, alot. best thing to do is post a want ad here and hope someone as them.

 

Also try Car-Part.com--Used Auto Parts Market to search at some of the local salvage yards. I just did it and I found several brushed, painted, and polished sets all within an hour of my house. Prices were $125-150 per set of 4.