so no **** ive driven my fx4 lvl2 threw some really sticky **** ive even pulled an f250 who was stuck up to the axles but the other day i went threw a dinky *** mud puddle and it dies now i cant start it tried pull starting it nothing i pulled the plugs still wont turn over please ne help is appreciated thanx

 

its broke.

 

Did you pull the plugs before or after attempting to start it?

When you pull started it, did it turn the motor over?

 

well thanx i know its broke the plugs were in the first time we tried to pull start it and as far as the the starter i here the selinoid hitting and a high pitch electrical sound but i dont here the starter

 

Put a breaker bar / socked on the crank pulled and try turning the motor over by hand....see if its locked up....

If the sylonoid is not engaging the starter and cranking then its more than likely hydro locked

Like L2EN .....how much water was in the mud hole? check your intake box and see if there is water in there / filter is wet....

Rocky

 

Starter seems to be working fine. High pitches noise would be it straining to turn the motor over. Appears you have some parts that are broke in side the motor that isn't allowing it to turn over freely.

 

hahah

you got the same problem as Travis (L2en) you're ****'s seized up like a ****

 

ok anyone know where i can find connecting rods if its hydro locked then more then likely i bent a rod and thats whats not allowing the turn over

 

I turned mine over to insurance

I'm still waiting to get the new motor, clutch, and whatever else....

 

Sorry to hi-jack, but Ins. is convering it? Awsome.

 

Oh yeah =]

Since the adjuster took so long to look at the truck.....I told them that the clutch was ruined due to the lack of power and that the master cylinder went as well =]

Serves em right for *fogive the pun* burning me on my last truck =]