Put in my lift springs today *pics*
Thread Starter
|
Member
Joined: Nov 2006
Posts: 420
Likes: 0
From: NJ
Put in my lift springs today *pics*
My truck seems about 4" higher then it was now look. I really need alignment cams and rear drop shackles now. Tell me what you think...
BEFORE
AFTER
Here are the factory springs next to the Skyjackers. They look to be about 4" taller right off the bat.
CLICK ME
Here they are installed, you can see the shocks are actually holding the springs back from expanding all the way. That is def. one of my next upgrades!
CLICK ME TOO
BEFORE
AFTER
Here are the factory springs next to the Skyjackers. They look to be about 4" taller right off the bat.
CLICK ME
Here they are installed, you can see the shocks are actually holding the springs back from expanding all the way. That is def. one of my next upgrades!
CLICK ME TOO
Thread Starter
|
Member
Joined: Nov 2006
Posts: 420
Likes: 0
From: NJ
You you think these will work to correct my alignment? They are only $25 each.
(the ones all the way at the bottom 827-24180)
http://www.jegs.com/webapp/wcs/store...tegoryId=25565
(the ones all the way at the bottom 827-24180)
http://www.jegs.com/webapp/wcs/store...tegoryId=25565
Member
Joined: May 2005
Posts: 12
Likes: 0
From: Livonia, Mi
KYB makes shocks for the 88-97 tib and ttb rangers.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
Thread Starter
|
Member
Joined: Nov 2006
Posts: 420
Likes: 0
From: NJ
Originally Posted by 5speedin2.3
KYB makes shocks for the 88-97 tib and ttb rangers.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
Member
Joined: May 2005
Posts: 12
Likes: 0
From: Livonia, Mi
your prob going to need a drop pitman arm also to get the alignment right.
this is the ttb drop bracket. you wont need one this big, but it gives you the general idea.
Edit: you can also see the drop pitman arm in the pic.
this is the ttb drop bracket. you wont need one this big, but it gives you the general idea.
Edit: you can also see the drop pitman arm in the pic.
Originally Posted by 5speedin2.3
KYB makes shocks for the 88-97 tib and ttb rangers.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
Thread Starter
|
Member
Joined: Nov 2006
Posts: 420
Likes: 0
From: NJ
Well I already bought superlift superide shocks for the front and back. I just dropped the truck off to get the hubs put in and an ABS sensor replaced. I removed the front valence to give me more clearance, higher look and better approach. I also relocated the Lic. plate.
Check it out:
CLICK ME
Check it out:
CLICK ME
Thread
Thread Starter
Forum
Replies
Last Post
PUNKROCKPILOT
Suspension Tech
55
Jun 14, 2019 06:47 PM
Strong316
1" & 3" Body Lifts
6
Jul 21, 2011 04:41 PM
Sonic04Edge
Suspension Tech
9
May 27, 2011 03:36 PM
ranger024x4
Snapshots
19
Apr 18, 2011 09:16 AM
