Put in my lift springs today *pics*
#1
11-14-2006
Join Date: Nov 2006
Location: NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Put in my lift springs today *pics*
My truck seems about 4" higher then it was now look. I really need alignment cams and rear drop shackles now. Tell me what you think...
BEFORE
AFTER
Here are the factory springs next to the Skyjackers. They look to be about 4" taller right off the bat.
CLICK ME
Here they are installed, you can see the shocks are actually holding the springs back from expanding all the way. That is def. one of my next upgrades!
CLICK ME TOO
BEFORE
AFTER
Here are the factory springs next to the Skyjackers. They look to be about 4" taller right off the bat.
CLICK ME
Here they are installed, you can see the shocks are actually holding the springs back from expanding all the way. That is def. one of my next upgrades!
CLICK ME TOO
#5
11-14-2006
Join Date: Nov 2006
Location: NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
You you think these will work to correct my alignment? They are only $25 each.
(the ones all the way at the bottom 827-24180)
http://www.jegs.com/webapp/wcs/store...tegoryId=25565
(the ones all the way at the bottom 827-24180)
http://www.jegs.com/webapp/wcs/store...tegoryId=25565
#6
11-14-2006
Join Date: Nov 2006
Location: NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
#7
11-14-2006
#8
11-14-2006
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#10
11-14-2006
Join Date: Nov 2006
Location: NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 5speedin2.3
KYB makes shocks for the 88-97 tib and ttb rangers.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
#11
11-14-2006
Join Date: May 2005
Location: Livonia, Mi
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
#12
11-14-2006
#14
11-14-2006
Originally Posted by 5speedin2.3
KYB makes shocks for the 88-97 tib and ttb rangers.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
i would spend the extra money and get the monotube kyb shocks..
thats what i plan on doing when/if i get a liftkit.
i also think your going to need drop brackets, along with the alignment cams.
#15
11-14-2006
Join Date: Nov 2006
Location: NJ
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Well I already bought superlift superide shocks for the front and back. I just dropped the truck off to get the hubs put in and an ABS sensor replaced. I removed the front valence to give me more clearance, higher look and better approach. I also relocated the Lic. plate.
Check it out:
CLICK ME
Check it out:
CLICK ME
#18
11-14-2006
Join Date: Nov 2005
Location: Aberdeen and Salisbury MD
Posts: 1,840
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
PUNKROCKPILOT
Suspension Tech
55
06-14-2019 06:47 PM
Strong316
1" & 3" Body Lifts
6
07-21-2011 04:41 PM
Sonic04Edge
Suspension Tech
9
05-27-2011 03:36 PM
