well i was trying to install my hurst shifter and im guessing that maybe it got knocked into gear before i took out the stock shifter stub?

either way, im F**KED cuz now my trucks stuck in either 2nd or 3rd and i cant do anything about it.....
trying to moove the shifter around it feels in neutral, but i cant get the shifter into any other gear at all....but when i start up the truck, its already in gear...


HELP PLEASE. i dont know what to do and its too late to try hurst's customer service or even trying any shop....

 

haha... been there done that.
Remove the shifter look down into the trans you will see you will see 2 rows of (i dont know what to call them but i'll call them teeth). Use a screwdriver and realign the top and bottom row of teeth put the shifter back on and you should be good to go.

 

you mean re-align the two button looking thinggs?

 

just found this pic on rps


It is a pic a guy took while installing his hurst and it is what should look like in neutral. Heres the link

My Hurst Intall write up/Tutorial: 29 pics so 56k watch out!!! - Ranger Power Sports Forum

 

thanks alot man. it really helped.

 

ok my slave cylinder went out, fixed that but now its stuck in gear i did what you said and its still in gear the only gear that it dont pull forward is reverse.
anything helps.


If its

 

I just joined ,I was stuck in first gear, I googled it and you guys showed up . I did what you said to do and it saved my ***. I had pulled it apart to replace the slave and clutch . When I put it together it was stuck and would not shift tried what you said and it saved my day.
Thank you !!!