stepside+4wheeler=too small
 

it took 3 of my friends to load up this 4wheeler.

Attachment 130282

Attachment 130283

Attachment 130284

Attachment 130285

Attachment 130286

sweet quad arctic cat DVX 250/400?? yup i had an 07 grizz 700 in my ext'd cab regular bed and it was tight... ranger's arent really built to haul a quad!!! haha

that last pic looks like the little transformer from the first movie. the one that is in barricade. you could have made a ramp. i bought some 8ft 2x8s and bought the end brackets and had a diy ramp for like $50. yea it sticks over my bed a little but it beats having to drive out to a relative's for the 12ft trailer.

2008 Kawasaki kfx 450r monster energy edition

that last pic would make an EXCELLENT avatar!

Yea, that is a very cool looking picture. Hopefully it doesn't move and smash your window.

Sean

I had a Honda Foreman in the bed of my steppy, talk about a very tight fit. It had a huge brush bar and winch on the front so I couldn't get it all the way in. The rear tires were centered on the gap between the tail gate and bed.

my quad is to wide to fit in my step side. I broke my tail bone riding it up the ramps, the front tires stopped moving right at the tire humps and the backs spun the ramp off the tail gate. That hurt like a beach so I use the chevy to haul the atv.

lucky! my 4000ex wont fit at all

maybe you should measure your atv's before buying a truck?

I put a full size 4-wheeler in my truck and had to just give it alittle more gas to wedge it in there. Fit fine.

that last pic funny..

yea i would load my atv in my truck n there wouldnt b ne more room so i would strap coolers and what not to the atv lol loooked like i was haitian packin

they arent? Good thing i have a mazda.

Attachment 130190

^^^ haha melt

haha thats a load right there

its called a hitch n trailer ya phuk

I had no problems with the 400ex until I put the wider A-arms on it... No I have dents in my fender wells of my standard bed... That is a tight fit in the stepside...

mazdas ftw!!

God that would suck! When I load mine I always ratchet strap the ramps to the frame of the truck so they can't kick out. I always think about just loading and unloading it without tying down the ramps but I wuss out and use the straps.

Styleside ftw!!!

no its not wussin out, its being safe, i cant tgell u how many times ive had my or friends 4wheelers go for a walk off the ramps, it hurts, its expensive if u hit ur truck, and its embarrassing, over the years ive gotten good with it, but if i am mud riding, i always strap them down, my tires will slip

i have no problems puttin a 08 yamaha grizzly 500 4x4 in mine.........just cant put the tailgate up

I put my TRX450ER in my 01 all the time. I wouldn't have bought the Honda if it didn't fit.
Now I have a rack that sits above the wheel wells, with the truck lifted it needs 10' ramps to make the incline doable Putting the quad in the first time with the racks was interesting feels like the front wheels are going to run over the top of the bed rails but you get use to it.
Use a winch to pull it up after long tiring rides and I can store all my riding gear large ice chest and two 5 gallon gas cans in the bed.
here is a link to my cardomain page that shows the rack and quad. (page two) http://www.cardomain.com/ride/3232840

I fit my 07 Honda TRX 250 with no problems, but my banshee and 450r don´t fit in my bed. i use a trailer.

[IMG]http://i948.photobucket.com/albums/a...91205-1400.jpg[/IMG]

[IMG]http://i948.photobucket.com/albums/a...91205-1359.jpg[/IMG]