The Time Has Finally Come!
#6
my sisters husband is going to spray it for me and fix the bodywork it needs.. i get to do the ****ty part sanding sucks
Something close to toreador red..all one color no more 2 tone..
Hell no lol we are taking it over to a shop and he is going to spray it there..iam just doing all the prep work at home so everything is ready to go when its time to be taken over to the shop to be sprayed
Something close to toreador red..all one color no more 2 tone..
Hell no lol we are taking it over to a shop and he is going to spray it there..iam just doing all the prep work at home so everything is ready to go when its time to be taken over to the shop to be sprayed
#8
cool cool
I got stuck with the prep work on my old rangers hood (twice) and bumpers (twice)
NOT FUN
#11
#13
#14
Only Thing Left is hand sanding the bodyline and smaller areas the air sander couldn't get to and also patching 3 areas on the truck with bondo
Remove the Bed and sand cab wall and bed edges
Remove Train-horns
Patch Bodywork
Spray rattle can primer on the bare metal areas
block sand
hand sand tag box, bodyline, V in the hood, cowl panel, around windshield
Remove the Bed and sand cab wall and bed edges
Remove Train-horns
Patch Bodywork
Spray rattle can primer on the bare metal areas
block sand
hand sand tag box, bodyline, V in the hood, cowl panel, around windshield
#17
if you are talking about patching the emblem holes with Bondo, good luck with them holding.....best/correct way to fill them in is to weld them....the Bondo wont hold very long....
to weld them up without having to put a plate behind them, hold a piece of brass behind them and weld them full.....weld wont stick to the brass, but it will fill the hole....then smooth....or you could cut out a patch piece and weld it in....
gonna look good finally 1 color...
to weld them up without having to put a plate behind them, hold a piece of brass behind them and weld them full.....weld wont stick to the brass, but it will fill the hole....then smooth....or you could cut out a patch piece and weld it in....
gonna look good finally 1 color...
#18
if you are talking about patching the emblem holes with Bondo, good luck with them holding.....best/correct way to fill them in is to weld them....the Bondo wont hold very long....
to weld them up without having to put a plate behind them, hold a piece of brass behind them and weld them full.....weld wont stick to the brass, but it will fill the hole....then smooth....or you could cut out a patch piece and weld it in....
gonna look good finally 1 color...
to weld them up without having to put a plate behind them, hold a piece of brass behind them and weld them full.....weld wont stick to the brass, but it will fill the hole....then smooth....or you could cut out a patch piece and weld it in....
gonna look good finally 1 color...
never said i was shaving the emblems..there are 2 dents on the top of the cab needing fixing and the drivers door where the handle was shaved needs a wipe of bondo....
#21