T-Bird to Ranger
 

Ive got a 87' Turbo 2.3 Motor and I'm building a Rod starting with a 89' Ranger Frame. The Ranger was a V6 Truck. I've got all mounts from the T-Birds and Ranger and can't see a way to bolt the motor. Can I get some help?

Have a look here: The Ranger Station - Engine & Fuel Systems Library

There are 3 articles on 2.3l turbo swaps into Rangers, motor mounts should be there

T-Bird to Ranger
 

Sorry but in those three articles nothing to do with motor mounts. I truly appreciate it though.

It says in one of those that the 2.3l turbo can use the Ranger 2.3l motor mounts, which you don't have but can get.

'89 frame should be pre-drilled for for those since 2.3l was an option that year, but can't say for sure.

T-bird to Ranger
 

Ok, The thing is that where this V6 Ranger has the mounts like really almost solid. The 2.3 motor has like donut mounts w/studs and a pin locator on either end.If you remove the mount off the V6 frame you will need an plate for the 2.3 mount to bolt to You would have to have an different plate bolted onto the frame to mount the 2.3 mount to. I unbolted the 2.3 mounts off the 87' T-Birds and you will need to have an different style of mounting plate on the Ranger frame to match up w/the 2.3 style mount.

T-bird to Ranger
 

Can anyone else respond? It is not a plug and play!! Frame is different! Someone on this site has to have done this I know, I'm not the only power hungry nut, or am I?

T-bird to Ranger
 

I found it... after going to an junk yard I found two brackets. Thanks anyway.

Good update

What were the brackets from?
Year/model?