So I need camber washers, and I found someone selling a set of 4 for $12. My question is this: are those enough for both front wheels? If it is, do they go on the ouside or inside of the c-arm?

Do I also need the bolts, or can I just use the ones that are already on?

Sorry for all these questions, but $12 is a good price and I need to get my camber issues fixed for as little as possible.

 

with only a 2 inch drop you should be alignable on stock eccentrics.

but 4 is enough for the front.

 

I'm on a 2" drop now, and it is still not alignable perfectly without those washers. I've been to two alignment shops and a family friend mechanic. I guess I was cursed with a Ranger with camber adjustable to a fraction of a degree. I'm also trying to go lower, so I will need them in the future.

Anyway, do you know if the washers would go on the outside of the arms, or on the inside, if 4 are enough for both wheels?

 

I think outside of the uppers not sure My dads put mine of when we lowered my truck and I did not pay attention damn add lol.

do you want the part number for eccentrics kit from napa for +2/-2 adjustable degrees?

with only a 2 inch drop you should be alignable without a doubt I hear people with 2 inch DJM coils being aligned all the time on stock eccentrics and i hear the DJM's drop the full 2 inches not like the roush kit...