Extended Brake Lines with 8" of lift?
Thread Starter
|
Member
Joined: Nov 2005
Posts: 158
Likes: 0
From: Atlanta, GA
Extended Brake Lines with 8" of lift?
Right now I have 3" spindles up front, 3" blocks in the rear, and will be installing 2" lift springs (and new UCA's), and 1.5" AAL in the rear this next weekend (hopefully). After that I'll be adding a 3" body lift, and 33's. Will I need extended brake lines to go with this new set-up? I was looking for ProComp braided cables, but I'm having trouble finding them. Also, driveshaft troubles with the total 8" lift?
Member
Joined: Jun 2004
Posts: 891
Likes: 0
From: Colorado, Lone Tree
well is that 8 inches of lift counting the 3 inch body lift? if so then u are only adding 5 inches of suspension ....
i have the 5 inch rcd in the rear and i had to get extended brake lines .... but it did not come with the kit ....
i have the 5 inch rcd in the rear and i had to get extended brake lines .... but it did not come with the kit ....
Thread Starter
|
Member
Joined: Nov 2005
Posts: 158
Likes: 0
From: Atlanta, GA
Originally Posted by Rangerboy03lvl2
well is that 8 inches of lift counting the 3 inch body lift? if so then u are only adding 5 inches of suspension ....
i have the 5 inch rcd in the rear and i had to get extended brake lines .... but it did not come with the kit ....
i have the 5 inch rcd in the rear and i had to get extended brake lines .... but it did not come with the kit ....
Right, 5 inches of suspension. I'm gonna need longer brake lines for that?
Thread
Thread Starter
Forum
Replies
Last Post
desertrunner07
OLD - Engine & Drivetrain
4
Apr 21, 2009 11:48 PM
