hoping this will level my truck
whats the easiest way to do this ,tools, etc.etc,
o and looking at this were can i find that U shaped part

 

that is the djm rear axle flip kit, it will drop tghe rear 5" in the rear

 

I would get a Expo axle before the DJM axle flip kit. Disc brakes FTW

 

What's pictured is a rear flip kit....moves the axle to ABOVE the leaf spring. Gives 5" drop. a DJM 2/3 I understand have that flip kit and shackles to raise it up to give 3" rear drop.

Not a spring hangler flip.

 

thats a flip kit, but looking at this says it will lower it 5" so youll need a lifting shackle to get bac an inch or two..
Illusive Design and Fabrications :: shop :: Flip Kits :: english

 

what the hell im just looking to LEVEL my trucks a$$ how did i look up drop kits .omg i lost wheres the rum

 

I searched "hanger flip"

https://www.ranger-forums.com/forum2...inch-drop.html

Thread has alot of info for the cheap, almost free spring hanger flip.


Within that thread, there's a link to a how-to on RPS... http://www.rangerpowersports.com/for...d.php?t=218815

 

ok im thinking i get this ,,,,,to level Flip rear spring hangers and get a lifting shackle to make it level not droped????????

 

no to make it level just flip you hangers like this, don't worry about the first pic you posted

 

wow ok
just becuz is there i level kit i can get

 

chevys are EXACTLY like that stock....

TONS of people flip their shackles on their rangers and drive them daily and put many many many many miles on them. What makes it not good on a DD??????

No, there's no kits. Unless you wanna lift the front using a spacer.

 

not that I know of

EDIT: Shane beat me to it

 

oooooooooooo ok i want it level with the front
just trying to get it all right be for i dig in to this

 

wow when you go and look under your truck the picture its alot clearer
NOW
dumbaSS question if i do can i still hual or will the leave hit the bed

yeah why of i do this does the end of the leaf spring look like will hit the bed

 

It wont, theres room for it. I ran my truck like this for like a week until I decided I didn't like the truck looking like it was squatting all the time.

 

BLAH what squatting ? i just want it level , damn
well that might be a bad look

 

It won't. There's lots of room for it. Just only use the stock shackle.

 

Well yours might sit a little better than mine, But when I did it, the truck sat perfectly level, unless I put anything in it, then it seemed like it just squatting from there.

 

ok cool
so will the bed have to come off ?

 

lol well yeah i would think so

 

Makes doing the job a whole hell of alot easier to remove the bed.

 

............... dang ok three friends and a 12 pack should take care of that

thanks for all the help man