ok i want to do a 6" suspension lift. but i might have a problem gettin in the parking garage at work. i was wondering what the height is after this. right now i have a stock 04 xlt. thanks in advance..

p.s. - the garage entrance is 6'4" and i hit the tip of my antenna everytime i go in

 

Measure to the top of your truck add six inches then add another couple inches based on what tires your getting. All trucks are different so you won't get a exact answer.

 

I don't think you will be able to fit, if you get that much lift.

That is a really low garage btw, I couldn't fit now

 

I think you could. I'm pretty sure my ranger with a 3 inch body lift and 35s can fit in a 6'4" garage. When I go in downtown minneapolis to SPIN nightclub, i always look for higher parking garages. Because I see how close the ceiling comes sometimes.

 

But all my lights would be busted, that's why I couldn't fit


The top of my lights sit 6'7", so nope I couldn't make it

 

just curious.. what 6" susp lift

 

either the rcd 6" or the fabtech 5 1/2"

 

my 2004 xlt 4x4 with a 3 inch BL and 33s is about 6 foot 3. so i dont think you could fit

 

I just measured the height of my cab with spindles and fabtech 2.5. It is roughly 6ft give or take an inch. I'm only 5'3" so its kinda hard for me to get an exact measurement lol. I have worn out 32"s on there right now so maybe add another 3/4" to 1" to that.

 

the height is actually 6'3" but ther's also one at 6'6" and one at 7'1" and the rest of the parking is residential oh and reserved parkin in the bay where i can fit very easily.

 

i have 7 in lift with 35's. im pretty sure mine is like 6'7, but then i have a rollbar which stucks up further i dont go anything under 7ft now