Originally Posted by dezranger

Just crank your t-bars for about 1 to 1.5" of lift and see what you think of the look and the ride... it's fully reversible if you don't like the ride. You can fit 32's under it with a 1" t-bar crank no problem. I found that a 1" t-bar crank doesn't affect the ride much, actually I like the ride better at a 1" crank, but above 1" it starts to get too stiff but that's just my opinion on my particular truck, you'd have to try it yourself and see what you think...

Originally Posted by 04RangerDave

I But let me tell you my entire front end is shot. I need New UCA with ball joints, Lower ball joints, new tie rods and a driver side axle. I would just do a 1" BL and leave the suspension stock.