Old bushings.........making noise?
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Old bushings.........making noise?
Everytime i hit a harsh bump or rather, undernethe the driver side floor board (where it sounds) its like a clicking type snapping noise? Are these my bushings? I havent replaced em yet but i can't see what else it could be?
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by 5speedin2.3
mine does the same thing, its more of a thunking noise tho.
it sounds like its right under the floor boards, they make after market poly bushings.
it also does it around corners on the highway.
it sounds like its right under the floor boards, they make after market poly bushings.
it also does it around corners on the highway.
Yup, ruight under neathe my feet. also if my trucks in park and i go out and rock the **** out of it, it starts to make the snapping, clapping noise...... turns i'm ok on, just rough bumps and harsh angles.
Member
Joined: May 2005
Posts: 12
Likes: 0
From: Livonia, Mi
Originally Posted by fletch12518
Yup, ruight under neathe my feet. also if my trucks in park and i go out and rock the **** out of it, it starts to make the snapping, clapping noise...... turns i'm ok on, just rough bumps and harsh angles.
mine gets going on corners when im going 50+.
i never noticed mine when i rock the truck, but you also have a ttb and i have a tib setup.
Member
Joined: May 2005
Posts: 12
Likes: 0
From: Livonia, Mi
http://store.summitracing.com/partde...5&autoview=sku
and this
http://store.summitracing.com/partde...5&autoview=sku
they also have black ones.
and this
http://store.summitracing.com/partde...5&autoview=sku
they also have black ones.
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by redranger4.0
id check your drive shaft joints, they tend to pop and make noise when they are on their way out
Member
Joined: Jun 2004
Posts: 15
Likes: 0
From: Firey depths
Originally Posted by fletch12518
front driveshaft? what do you mean "when they are on their way out"
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
Originally Posted by redranger4.0
When the joints get some slop in them they start to pop. My front Driveshaft did this alot, untill i had a new one made.
um.......i shouldnt need to get a new one would i?
Member
Joined: Jun 2004
Posts: 15
Likes: 0
From: Firey depths
Originally Posted by fletch12518
um.......i shouldnt need to get a new one would i?
no i got a new one cause i had put an ifs lift on so i had a new one made, but the symptoms are the same. I had that exact poping sound.
Thread Starter
|
Member
Joined: Oct 2005
Posts: 3,262
Likes: 1
From: Havre De Grace,Md
o boy this aught to be funnnnnnnnnn..............last time i did ujoints it took 9 TONS of pressure to pop the ujoint out in a hydrolic press at work. that was after heating it and such.
Member
Joined: Jun 2004
Posts: 15
Likes: 0
From: Firey depths
Originally Posted by fletch12518
o boy this aught to be funnnnnnnnnn..............last time i did ujoints it took 9 TONS of pressure to pop the ujoint out in a hydrolic press at work. that was after heating it and such.
Last edited by redranger4.0; Feb 2, 2007 at 10:07 AM.
Thread
Thread Starter
Forum
Replies
Last Post
FireRanger
General Ford Ranger Discussion
11
Jan 17, 2007 09:43 AM
TXranger4x4
General Technical & Electrical
2
Oct 12, 2006 09:30 AM
