I have a ford 2wd ranger frame I think it has the old style arms and the spindle has 2 holes for caliper bracket the holes are 6 3/4 holes on my spindle the calpier brackets I keep getting are 5 3/4 any ideas??? I have been to ford dealership they no idea and I have been to all auto parts places here

 

What year Ranger ?

 

I don’t know it’s just the frame someone took the brackets off

 

does it have Twin I beam front suspension or upper/lower control arm suspension ?

If it has upper/lower control arm suspension, does it have coil spring or torsion bar suspension?

 

It has twin I beam with coils.

 

Is the sway bar still there ?
Is it in front or behind the twin I beams.

83-88 would be behind I beams
89-97 would be in front of I beams

 

Not sure they are not there sorry

 

Do those early years use a caliper bracket my spindles have holes were a bracket can be bolted to???

 

Can you see on the frame where a sway bar would be based on the information given?

 

No I can not the truck is converted to air bag suspension the holes for the caliper bracket has the bolt holes on my spindle are 6 3/4 hole to hole the bracket that they are giving me are 5 3/4 hole to hole was there that many choices in those years??