does any one know if any either of these lifts would fit my 2008 fx4 ranger
Skyjacker Suspensions 138RHKS-A - Skyjacker 4WD Suspension Lift Kits - Overview - SummitRacing.com
Skyjacker Suspensions 236R2KS-A - Skyjacker 2WD Suspension Lift Kits - Overview - SummitRacing.com
also other people on this sit said this lift would fit Superlift Suspension K357 - Superlift 4WD Suspension Lift Kits - Overview - SummitRacing.com but has any one actully installed this on there late model ranger?
thanks for the help ryan

 

K357 only

 

I have the superlift, its good

 

only options are the superlift suspension lift.. or a bodylift.. just depends how much you are willing to spend... you could also get a set of 'prekeys' and get larger blocks for the rear....

 

fabtech makes a very inexpensive kit.
Camburg makes a very respectable kit!
Dixon bros makes a more aggressive kit for a 2wd or 4wd
a cheap alternative is to get yourself a fabtech spinal ($400-$700), torsion keys ($125-225) for the front and some basic lifting blocks for the rear with a longer shock ($100-$300). look around... you can do this for less than a grand. My buddy has the 08' sport ranger and it looks good with about 5 1/2 inches of ground clearance!

 

You can't use a spindle lift on a 4x4. So that rules out everything you listed except the DBR.

 

I guess your right. oops! get the dixon!

 

i dont think hes building a desert rig if hes lookin at skyjacker. as said super lift or body lift and torsion crank, what ever you do to lift the rear dont put bigger blocks

 

Superlift for the front. Then get expo springs and shackles for the rear.

 

I also have an 08 Ford Ranger and im looking for a 5'' or higher lift kit. What did you find was the best option?

 

If you want 5" or higher, RCD or coilover conversion are your only options. BTW the RCD is out of production

 

3" to 4" Superlift and 3" body lift.

 

Superlift and 33" tires.