Suspension Tech General discussion of suspension for the Ford Ranger.

superlift

Thread Tools
 
Search this Thread
 
Old Nov 15, 2009
  #1  
03ranger's Avatar
Thread Starter
|
Member
Joined: Jul 2009
Posts: 519
Likes: 0
From: Irwin, Pa
superlift

I have 2003 ranger 4x4 and im looking to put a super lift on it. Is this a good kit to buy or not??
 
Reply
Old Nov 15, 2009
  #2  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
yes its a good kit and the only kit left for lifting.

call around and make sure they have it in stock most dont and neither does superlift
 
Reply
Old Nov 15, 2009
  #3  
03ranger's Avatar
Thread Starter
|
Member
Joined: Jul 2009
Posts: 519
Likes: 0
From: Irwin, Pa
i was just seeing what other peoples opinion was on it and how hard it was to install the kit.
 
Reply
Old Nov 15, 2009
  #4  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
Search is your friend its been talked about alot and also alot lately. just go in suspension you will see tons of threads just on the first page

the kit is very straight forward for install. if you can handle a wrench and know what suspension parts are your fine its constructed well. remember to get a new SL driveshaft or make your own your stock CV driveshaft wont last long
 
Reply
Old Nov 15, 2009
  #5  
KLC's Avatar
KLC
RF Veteran
iTrader: (29)
Joined: Nov 2007
Posts: 13,115
Likes: 5
From: New Mexico
I have a Superlift w/ coilover conversion and it's great! The install is straight-forward, basically un-bolt stock parts and replace or lower with Superlift parts. You could do it with hand tools, but an air compressor and an impact makes it much easier. I say go for it!
 
Reply
Old Nov 15, 2009
  #6  
rangerboy101's Avatar
RF Veteran
iTrader: (5)
Joined: Aug 2007
Posts: 8,187
Likes: 3
From: Winchester, Va
Originally Posted by KLC
I have a Superlift w/ coilover conversion and it's great!
That we've yet to see pictures of... /endhack LOL
 
Reply
Old Nov 15, 2009
  #7  
squrll's Avatar
Member
Joined: Nov 2009
Posts: 191
Likes: 0
From: fairfax va
just getting ready to do my lift starting to get everything put together and stuff the is a thread in projects with pictures
 
Reply
Old Nov 15, 2009
  #8  
KLC's Avatar
KLC
RF Veteran
iTrader: (29)
Joined: Nov 2007
Posts: 13,115
Likes: 5
From: New Mexico
Originally Posted by rangerboy101
That we've yet to see pictures of... /endhack LOL
I could take some half-complete pictures. I will have everything completed and pictures up by the end of the week. I worked on it most of the day and got all the coilover gussets and various other brackets welded on. My only problem is finding time to finish it, which is why I won't have it finished till the end of the week.
 
Reply
Old Nov 16, 2009
  #9  
03ranger's Avatar
Thread Starter
|
Member
Joined: Jul 2009
Posts: 519
Likes: 0
From: Irwin, Pa
im just looking to buy the kit without the coilovers and the only problem is that i have only hand tools no air tools which kinda sucks but i guess i gotta deal with what i have. And where di you buy ur kit at??
 
Reply
Old Nov 16, 2009
  #10  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
the kit doesnt come with coilovers those guys are talking about custom work nothing to do with the basic kit.
 
Reply
Old Nov 16, 2009
  #11  
David N's Avatar
Member
Joined: Dec 2008
Posts: 1,060
Likes: 0
From: Williamston, NC
Originally Posted by 03ranger
im just looking to buy the kit without the coilovers and the only problem is that i have only hand tools no air tools which kinda sucks but i guess i gotta deal with what i have. And where di you buy ur kit at??
You can do it without air tools. Just make sure to spray everything with WD-40 before hand. And you will have to look around. Like what was said, some have them and some dont.. but look around, you'll find one. I
 
Reply
Old Nov 16, 2009
  #12  
Off-roadranger04's Avatar
Member
iTrader: (2)
Joined: Nov 2008
Posts: 1,751
Likes: 0
From: Newark, Delaware
i have the superlift and i love it! its a great all around kit... very easy to install! I got my kit at Performancelifts.com
 
Reply
Old Nov 17, 2009
  #13  
03ranger's Avatar
Thread Starter
|
Member
Joined: Jul 2009
Posts: 519
Likes: 0
From: Irwin, Pa
does anyone have a picture of a 4 inch superlift, 3 inch pa body lift, and 33 inch tires??
 
Reply
Old Nov 17, 2009
  #14  
Redneckstone's Avatar
Level III Supporter
iTrader: (2)
Joined: Jun 2004
Posts: 24,936
Likes: 11
From: usa
search for rangerextreme
 
Reply
Old Nov 17, 2009
  #15  
KLC's Avatar
KLC
RF Veteran
iTrader: (29)
Joined: Nov 2007
Posts: 13,115
Likes: 5
From: New Mexico
If you are going to go to all the trouble and expense of buying and installing both lifts, why just 33's? Of course this is just my opinion.
 
Reply
Old Nov 17, 2009
  #16  
squrll's Avatar
Member
Joined: Nov 2009
Posts: 191
Likes: 0
From: fairfax va
Here you go

Here you go not the best picture and no its not mine although I did look at it and thought I was going to buy it but had way to much wrong with it glad I picked up my FX4 now all I need is a long weeekend to put on the lift
 
Attached Thumbnails superlift-3m53oe3p45o45sd5r799u0e4da7f6b9aa1daf.jpg  
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
got-dirty
Suspension Tech
15
Jul 16, 2005 07:17 PM
TippnOver
Suspension Tech
16
Jun 30, 2005 12:44 AM
Gearhead61
General Ford Ranger Discussion
3
Jun 17, 2005 08:30 AM
brandons35
Suspension Tech
4
Jun 14, 2005 11:47 AM
Gearhead61
Suspension Tech
3
Jun 3, 2005 03:36 PM




All times are GMT -6. The time now is 02:54 PM.