Saw these spindles on ebay, anyone know if they're any good?
thx for any input

http://cgi.ebay.com/ebaymotors/ws/eB...link:middle:us

 

A couple people have them, if you really abuse your truck I would go with fabtechs. A few people have broken them jumping their trucks and stuff.

 

You get what you pay for. IMO get a fabtech to start out with. Then if you want something better go Camburg or Dixon Bros. Fabtech ones will come with 3" spindles, shocks and springs(front and rear shocks), control arms with bushings, lift block for the rear and AAL, alignment cam and bolt kit.

You may be paying more in the long run for those ebay junks, because they will wear out. Will have to replace bushings, and shocks and whatever else. If you want to do a cheap lift then just throw on a good 3" body lift. I love my fabtech one it lifts my truck up and can take some abuse, though jumping 20ft sandunes is out of the question. They will break!

 

Fabtechs are strong as FU(K!! I have beat the **** out of my fagtechs and they take every bit of it.

 

i have the doestech or whatever spindles just to hold me over a year or two till i get an lt kit, i didnt see justifying spending all the money for a fabtech one when im going to upgrade down the line....

 

I ran the doestch spindles for a year, beat the hell out of them with no worries, now they are on another Ranger that is beat on badly and they are still perfectly fine.
He has an EDGE, so no coils/springs for him.

 

cool, thx a lot for the help

 

where can i find a good deal on the fabtech ones? i only want the spindles, i'm not lifting the rear, thx again

 

search used on ebay dezrt rangers or craigslist to get the best deals...

 

sounds like a cheap version i would just get the good stuff thats an important part of your truck

 

http://www.shocksandsuspension.com/p...em-37_dc-5.htm

are these the ones you have? i'm about to buy them, i don't wanna screw up here
thx

 

I'm guessing your going for that West Coast Lean?