would procomp 32s fit my truck?

 

yes. i had 34"S WITH A TORSION BAR CRANK AND FACTORY 2INCH BLOCKS IN THE REAR

 

oops sorry about the caps

 

Steven are you just posting for the hell of it learn and read what people have he has a I-beam truck you have a A-arm T-bar truck two totally different beast not even compatable...

giving out bad info isnt something you should start doing

 

my truck has a 2inch leveling kit in front,and skyjacker shocks.

 

excuse the hell out of me.............

 

32s fit?

 

sorry man i saw the 2inch leveling kit and automatically assumed u had torsion setup....iam still new to suspensions but iam learning....but i know with a leveling kit u will beable to fit 32's under there


now many inches it from the ground to the edge of your wheel well?

 

leveling kit i have is a 2inch block that goes under the spring in the front,and back is stock

 

yea u should be able too! i have seen 31s on ur truck and they fit with room without the leveling kit

 

when u say stock does it have a block in there from factory? a 2inch one?
if so you will have no problems stuffing 32"s under there

 

i have to measure that dont know at the time.i know 31s will fit but 32s will look cooler

 

go measure right quick......

 

crap, i have to look at the back,not sure

 

measure from ground to top of wheel well?

 

yes

 

hold on a sec need to find a tape.

 

what BS is on the wheels thats your killer on the 3rd gen trucks. i have measure the inside wheel well and fender for 32x11.5x15 on my truck it will work find for a 15x7 with 4.5" BS but anything larger then that i dont think it would. and being all 3rd gens all sit defferent its hard to say with out getting in there with out a tape measure.

 

measured at 33 1/2 inches and the back has a factory block

 

its not always the hight it helps but the wheel size IE 15x8 15x7 and BS matters here...what are they?

 

my are 15x8

 

backspacing? 4" 3.75" 3.25"?

 

i fit 32's on my 3rd gen stock suspension on stock wheels

 

stock wheels are the key righ there they are 15x7 with 4.5 BS which help suck the tire in which is the 100% reason why i just bought stock alcoa wheels...

 

should i just go with 31s then?