Knurl Diameter.
#1
#2
Ok, for those that have a 2002 (or compatible) 2wd Ranger, I have the Knurl Sizes for the front and rear wheel studs. Also have the other specs.
Thread - 1/2 x 20
Knurl - Front .570, Rear .618
Shoulder - Front 19/32, Rear 3/8
Length - Front 1 7/8, Rear 1 13/16
This is valuable information if you are looking for longer studs. Took me some time to find someone that had this info. I have not found longer studs yet, but I am still looking. Went through Ford, Autozone, O'Reiley's and several places on the internet including Jeggs and Summit and finally found the info at Napa.
*Edit* (these are stock measurements)
Thread - 1/2 x 20
Knurl - Front .570, Rear .618
Shoulder - Front 19/32, Rear 3/8
Length - Front 1 7/8, Rear 1 13/16
This is valuable information if you are looking for longer studs. Took me some time to find someone that had this info. I have not found longer studs yet, but I am still looking. Went through Ford, Autozone, O'Reiley's and several places on the internet including Jeggs and Summit and finally found the info at Napa.
*Edit* (these are stock measurements)
Last edited by 3906brad; 03-12-2005 at 07:35 PM. Reason: stock measurements
Thread
Thread Starter
Forum
Replies
Last Post
Prerunner-Ranger
Drivetrain Tech
11
03-12-2008 09:57 PM
IamLegend
General Ford Ranger Discussion
14
01-09-2008 06:25 AM
Deadpresidents
General Technical & Electrical
16
12-06-2007 10:02 AM
Deadpresidents
Wheels & Tires Semi-Tech
10
12-05-2007 10:58 AM