Buying a new wheel tire package
Buying a new wheel tire package
Like the tiltle says I am buying a new wheel and tire package. I no what I want I would just like someone to confirm the fit.
Truck: 2008 FX4 torsion bar crank
Wheels: Pro Comp X treme Alloy 8069
16" x 8"
Tires: Goodyear Duratrac 285/75/16
I will post pics when they are installed
Thanks
Truck: 2008 FX4 torsion bar crank
Wheels: Pro Comp X treme Alloy 8069
16" x 8"
Tires: Goodyear Duratrac 285/75/16
I will post pics when they are installed
Thanks
your truck looks really good. I also have 285/75R16 Goodyear Tires (Goodyear MTR's old style) on 16x8 wheels and really like the look. I put the Belltech shackles on at the the 1" lift setting and cranked the t-bars for 2" lift. Check out my gallery/album for some pics. Its my sons truck and he is going for the "rally truck" look as he calls it... so that's the direction that we are headed with it... cool truck, thanks for posting the pics!
Thanks for the compliments everyone. I am super pleased with the way it looks accept my truck is no longer a truck. I have to be careful not to rub. Full crank left and right no problem but big bumps and bumps in corners very mild rub. I don't think I could take it off road this way.
It is very stuffed. Over speed bumps I have to slow down and that is not what a truck is for.
Sorry to disappoint but I ordered the PA body lift before reading your guys reply's
I should have but the body lift is on the way.
That truck looks great.
vista4.0 looks pretty good my man. alittle stuffed but it looks good.
01RangerEdge I like the look. Don't put a body lift on it
ranger024x4 do the pre key mod and shackles.
dezranger Check out my gallery/album for some pics
Well, since the BL is already on it's away. Please use gap guards. Trucks look so bad with huge gaps in the fenderwells. Since you have a hitch, please correct it. Lose the tailpipe tip while you're at it
Just a few suggestions
Just a few suggestions
looks great ,might go this way to,i all raedy got the rear shackel installed and t-bars fully cranked whit your new experience do you think 285-75-will be good on mine i only do some light wheeling
nice choice of truck by the way.
nice choice of truck by the way.
Thanks for all the tips. After the install is done I will correct everything. I am going to fab up some gap guards, fix the hitch and i might weld in a new elbow to turn the exhaust back up to the body.
Thanks. Its on my list of things to do
Nice looking truck, makes me wish I had found a black FX4 instead of DSG. Black wheels with white letters out look great. Looks alot like Fullscales truck.
Last edited by Jason8n; Jul 25, 2011 at 07:51 PM.
I live downtown Toronto and my driving style is "Get out of my way you Idiot"
I hop curbs, hit speed bumps, do u-turns and run over cyclists
. lolThe body lift will put me back on the war path.
The shackles will help but the problem is in the front. Without a body lift I will say pre-key is a must. It does rub over speed bumps. Hope this helps
nothing wrong with a bodylift! done properly they look fine.
you could probably get away with prekeys and preblock, or shackle..
when i prekey'd my 08 i gained 2" w/ a mild tbar crank.. and ditch the 08 block (1.25") for a real 2.5"!! then after that just bodylift it, because bigger is usually better!
great looking truck so far!
you could probably get away with prekeys and preblock, or shackle..
when i prekey'd my 08 i gained 2" w/ a mild tbar crank.. and ditch the 08 block (1.25") for a real 2.5"!! then after that just bodylift it, because bigger is usually better!

great looking truck so far!
Thread
Thread Starter
Forum
Replies
Last Post
LuckyRanger13
Wheels & Tires Semi-Tech
13
Mar 22, 2011 12:18 AM
HAZZARDJOHN
Wheels & Tires Semi-Tech
12
Jul 12, 2006 02:13 AM








