I want to see good pics of your trucks with 32s, I really cant decide if it looks much better then a 31, well to in my opinion anyway. Just some pics please and if you want you can say what kind of lift and all that you have too.

 

Check out Christians (Trevelyn1015) Edge. He's running 32's with no lift just a t-bar crank.

 

here's mine on 31x11.5 on 15x8 black rock crawlers

 

wait 31s or 32s? ^^^

 

i kno u requested 32's.. but those r 31's with full tbar crank

 

oh na I was just confused by "31x11.5" 31 pics are good too! Im trying to compare the two!

 

haha ya.. its hard to find a 31x11.50 tire.. i think, but i dont look at tires much.... those were futura dakota at's.. decent tire.. thanks alot

 

Go with the 32x11.5R15s


you;ll be much happier

 

Here's my 2005 Ranger, with mod's listed in the sig below.

 

I am running Maxxis Bighorns 32x11.50's on Eagle Alloy 058 15x8's. I cranked the t-bars about 3 turns.

I need to take some better pics with a little sun shinning.

 

with just the t-bar crank, how much do the rear tires rub when u flex out the back end on 31's?

 

deep wedgewood blue ftw!!!!

 

Here's mine with 32's. Cranked the t-bar about 3 turns.

 

Here's mine......32x11.50r15 BFG Mud Terrains on 15x8 US Wheels Black Daytonas, backspace of 3.75. Cranked Bars. Does Rub on the inner fender....but not much.






DEEP WEDGEWOOD BLUE FOREVERRR!!!!

 

if your sig is correct 32' are going to be a tight fit on a 2wd xlt without a lift

 

MB 72 Wheels wearing 32x11.5x15 BFG's


Rick

 

Awesome pics guys thanks! I love the look of a BFG Mud 32, although All Terrain is awesome too!!

Yeah 32s wouldnt fit on my 2wd stock, but with a 3" lift itd be ok!

 

all these pics make me wanna get my 32's.... drool

 

i have a 2wd xlt with 3" spindles and 32s:

 

I have the same problem. I have an xlt 2wd, so although these 32's look great I cant just crank up my t-bars. I don't want new spindles cause mine's an '07 that's still under warranty. I'm wondering if leveling springs will be enough for 32's, and if they will affect my warranty.

 

Man I can't wait till I get my 32's!

 

If I thought I had the power to turn 32"s id probably go for some myself. :P
Ill wait for the new engine first.

 

31x10.5 on stock 15x7 wheels (no lift):




31x11.50 on 15x8 3.75bs wheels (3" body lift):




32x11.50 on 15x8 3.75bs wheels (3" body lift rear explorer springs):




32x11.50 on 15x10 3.25bs wheels (3" body lift rear explorer spring t-bar crank):

 

Here's my '99 XLT 2wd on 3" spindles and 32x11.5 BFG Mudders. Stock 15x7 Explorer rims

 

In the rear, your fine. DEFINATELY not the front. 32s will fit fine in the rear, probably no flexing though. It's the fron tthats the really bad part on a 2wd xlt. You'll have to go with either a body lift or spindles to fit 32s.